Beresford Bushmaster DAC

[Werner Berghofer]

Dave,

Bushmaster above the volume control

there are only 7.5 millimeters available above and below the volume control. This in my opinion is not enough to place the model description “Bushmaster” in a pleasing and satisfying way.

With 24bit/192khz under the volume control it would sit well with the final few characters sat under the flat base of the volume wedge icon.

But this would introduce yet another horizontal axis, which would be vertically aligned to no other element. And it might suggest the idea that the volume control could be used to change the bit resolution or the sampling frequency. I would not place anything below the volume control except the volume icon, since the room there is very limited.

It might work if the part “24 bit/192 kHz DAC” was placed aligned left below the “Bushmaster” word. Personally I think this technical specification does not need to be present at all on the front plate, but this is something Stan has to decide.





Werner.