So many cartridges, so little time....
Marco.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,994
I'm AudioAl'sArbiterForPISHANTO.
So many cartridges, so little time....
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
...or a Technics 100C, an original Dynavector Karat Diamond or an ADC 26.
ELP Fanboy
Location: Yorks
Posts: 16,643
I'm Nobody.
Originally Posted by MartinT
Senior Member
Location: Nottingham UK
Posts: 550
I'm ThinkingOfHorns.
Very interesting thread. I really rate the silver Audio Note cables made up into a tonearm cable, but they don't come cheap. So this could be a cheap alternative.
I will look forward to all the full reviews, after the cables have arrived, had time to settle & been put through their paces a little.
alfie
Main System: Denon DP-6000 VPI Base/Fidelity Research FR64s/Ortofon SPU Royal GM MKII/Shelter 901/Auditorium 23 SUT/Pure Sound P10/SB Touch or Audio Note CDT & M2Tech Young Dac/BL Audio LP-1/New Audio Frontiers KT66 Legend/Living Voice OBX.
2nd System: PC/Foobar/E-MU 0404 pci (Modded)/AVI ADM9/Rel Strata II subs.
Trade: Wakefield Turntables
Location: Yorkshire
Posts: 9,794
I'm Andrew.
To get back on track. My tonearm cable arrived today so I'll have a quick plug in and listen over the weekend. I'll update you all soon.
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE / MONO
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,994
I'm AudioAl'sArbiterForPISHANTO.
Nice one, Andy. It'll be interesting to know what you think
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Trade: Wakefield Turntables
Location: Yorkshire
Posts: 9,794
I'm Andrew.
Just fitted it after extensive remodelling of the 1210 sub plinth, I've had to hack a fair old bit for it to fit but its now in and fitted so a week or two's listening is needed.
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE / MONO
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,994
I'm AudioAl'sArbiterForPISHANTO.
Update
Is the cable Yannis sent still hitting the spot, Andy?
Anyway, just another update on the position with my own tonearm cables, and also a small clarification...
Yannis has now shipped my 432.5 Phono Litz cable, pictures shown, as below (he sends his apologies for the poorer than usual picture quality, as his usual camera is in for repair):
As you can see, this cable has been fitted with a 'straight-type' Furutech CF-DIN(R) and some solid-silver Eichmann 'Bullet-Plug' RCAs. The new cable should be with me early next week, so I'm looking forward to hearing how it sounds in comparison with the less expensive 428 Phono Litz cable, which I've currently got.
However, just to clarify things... The cable Andy has is in fact an 'SPD-4', which is different from both the 428 and 432.5 Phono Litz, as it is not a Hybrid design. The point of a hybrid is to use pure cores of different materials. Andy's cable is just solid-silver, as apparently that's what he requested. The SPD-4 is a 'special order only' cable, and notably more expensive than the other cables in question.
Therefore, to allow me to compare the differences between a silver litz cable, and just a solid-silver cable, using the same connectors, Yannis is now also sending me an SPD-4, which will be with me in two weeks. It'll therefore be very interesting hearing what that brings to the party, bearing in mind its significant (but not excessive) extra cost.
A full review, therefore, of all three tonearm cables will take place as soon as I have all of them in my possession!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: cardiff
Posts: 268
I'm Tristan.
What is the price of that other cable? SPD4?
Senior Member
Location: cardiff
Posts: 268
I'm Tristan.
You can get an Oyaide pure copper cable for £230. These greek cables are not as cheap as you think when you examine it.
Posting Permissions
Reply With Quote
