+ Reply to Thread
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 40

Thread: The Paul Hynes regulator modules have landed, chez-Marco!

  1. #1
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,479
    I'm AudioAl'sArbiterForPISHANTO.

    Arrow The Paul Hynes regulator modules have landed, chez-Marco!



    I went yesterday to Anthony's to have these fitted... The combination of different parts of the circuitry now being individually regulated, powered by the massive beast that is the SR7-EHD PSU, is quite simply STUNNING. List of parts added, as follows:

    TDR21 dual 21-volt regulator module £160.
    S1709v4LN regulator module £36.
    Z1705LN regulator module £36. All available from: http://www.paulhynesdesign.com/

    Could this be one of the biggest upgrades I've heard yet for the Techy?

    Find out later, with a full review!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  2. #2
    Join Date: Nov 2010

    Location: Yorkshire

    Posts: 9,778
    I'm Andrew.

    Default

    oh FFS were is my wallet.
    SS
    CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10

    VALVE / MONO
    PRE
    Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker





  3. #3
    Join Date: May 2010

    Location: Weymouth

    Posts: 3,461
    I'm John.

    Default

    Very neat Marco. Looking forward to your thoughts.

    John
    Sent by me using an appendage



    SME Model 15/V tonearm, Sumiko Starling, Dynavector P75IV.

    Luxman 509X amp.

    PMC 25 23i speakers.

    Innuos/Roon/Qobuz/I-Pad. Oppo UDP-205.

    Cables by Kimber, Yannis and Audioquest.

    Audioquest Niagara. Tube Distinctions Mains power filter. Project RCM. Zerostat.


  4. #4
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,479
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Cheers, guys. I was out all day yesterday at Geoff's T/T bake-off in Cheshire, so haven't had a chance yet to do a proper write-up on the reg mods. I'll do that later today.

    Meanwhile, here are some pics, taken when I was at Anthony's place, having the regulator boards fitted, showing his superb system and also my new Ortofon ST80SE SUT (shown on top of one of Anthony's Soul Mate preamps):















    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  5. #5
    Join Date: May 2010

    Location: Weymouth

    Posts: 3,461
    I'm John.

    Default

    Quote Originally Posted by Marco View Post
    Cheers, guys. I was out all day yesterday at Geoff's T/T bake-off in Cheshire, so haven't had a chance yet to do a proper write-up on the reg mods. I'll do that later today.

    Meanwhile, here are some pics, taken when I was at Anthony's place, having the regulator boards fitted, showing his superb system and also my new Ortofon ST80SE SUT (shown on top of one of Anthony's Soul Mate preamps):















    Marco.


    Luverly,
    Sent by me using an appendage



    SME Model 15/V tonearm, Sumiko Starling, Dynavector P75IV.

    Luxman 509X amp.

    PMC 25 23i speakers.

    Innuos/Roon/Qobuz/I-Pad. Oppo UDP-205.

    Cables by Kimber, Yannis and Audioquest.

    Audioquest Niagara. Tube Distinctions Mains power filter. Project RCM. Zerostat.


  6. #6
    Join Date: Nov 2008

    Location: Valley of the Hazels

    Posts: 9,143
    I'm AMusicFanNotAnAudiophile.

    Default

    Have they found oil in a living room in South Wales?
    Chris



    Common sense isn't anymore!

  7. #7
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,479
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Soz, don't follow....

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  8. #8
    Join Date: Nov 2008

    Location: Valley of the Hazels

    Posts: 9,143
    I'm AMusicFanNotAnAudiophile.

    Default

    Couple of oil rigs either side of the equipment rack
    Chris



    Common sense isn't anymore!

  9. #9
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,479
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Ah, right... Lol.

    They're actually (if you didn't know already) old Atacama speaker stands, which I used to use with my Spendor SP100s. They support Anthony's super-sexy Soul monoblocks perfectly!

    You'd love the sound of that system...

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  10. #10
    Join Date: Mar 2009

    Location: north yorkshire

    Posts: 700
    I'm john.

    Default

    very nice indeed marco



    jon

+ Reply to Thread
Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •