You mean that you guys weren't connecting the chassis earth point up to the arm earth?????
Senior Member
Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...
Posts: 14,540
I'm David.
You mean that you guys weren't connecting the chassis earth point up to the arm earth?????
I can't go on and I can't go back, I don't feel so matter of fact,
I tried and tried to make good sense, What's the good to try it all again?
Not when a metal armboard is used on the Technics - that provides the arm earth to the turntable. Not ideal, but avoids a loop.Originally Posted by DSJR
The insulated arm board and two earths back to the preamp scheme sounds better to my ears.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,494
I'm AudioAl'sArbiterForPISHANTO.
Ditto!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,494
I'm AudioAl'sArbiterForPISHANTO.
Hi Pete,
Just in case you're interested, I have a very nice Furutech CF60 XLR plug available for sale.I have decided to use an XLR connector on the PSU end, I was wondering if using a shielded signal cable like the mogami quad mic cable would be appropriate for the powersupply cable? I see you use a loose braid unshielded.
It's the male version of the one shown below, and unquestionably the finest XLR plug I've used (actually, I'd say that it's arguably the best that has ever been made):
http://www.analogueseduction.net/pro...nnector_CF602R
The only reason I'm selling it is because since installing Paul's SR7 EHD, I've used the lead and connector he supplied with it.
If you're interested in the CF60, PM me and I'll give you an offer you can't refuse!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: So Cal
Posts: 139
I'm Pete.
Thanks for the offer Marco.
I've got a silver neutrik xlr pair I am going to use that I just dug up out of my parts bin.
Cheers
Pete
Hearing is believing
SL-1210 Mk5 w/Mike New Platter/bearing/armboard; Hynes SR5 DIY PSU;
Zyx Airy3X; SME V; Hashimoto HM7 SUT; CJ PR15MkII Phono w/teflon caps.
Modwright LS36.5 Dual Mono Preamp & KWA 150 amp > Paradigm Ref 100 v.4s
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,494
I'm AudioAl'sArbiterForPISHANTO.
No worries, dude - enjoy
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
You have all convinced me I have ordered a set of PS mudules from Paul
Expect to get them some time in March, he is a busy cherub.
Trade: Paul Hynes Design
Location: Scotland
Posts: 316
I'm Paul.
Yes, and I’ve ordered a boring and boring buse plot from Mike.
Paul Hynes Design
paulhynesdesign.com
High Performance Power Supply upgrades
http://theartofsound.net/forum/showthread.php?t=16655
Senior Member
Location: So Cal
Posts: 139
I'm Pete.
Wow! That totally did not translate into AmericanYes, and I’ve ordered a boring and boring buse plot from Mike.
Hearing is believing
SL-1210 Mk5 w/Mike New Platter/bearing/armboard; Hynes SR5 DIY PSU;
Zyx Airy3X; SME V; Hashimoto HM7 SUT; CJ PR15MkII Phono w/teflon caps.
Modwright LS36.5 Dual Mono Preamp & KWA 150 amp > Paradigm Ref 100 v.4s
Hi Pete,
They are funny people in the Islands, it's all those sheep!!
Posting Permissions
Reply With Quote
