Moi? No.
Just think how pretty that series 3 would look mounted on a custom plinth with an SP-10 though. It would be a thing of beauty.
Location: Northampton
Posts: 1,373
I'm Mark.
Moi? No.
Just think how pretty that series 3 would look mounted on a custom plinth with an SP-10 though. It would be a thing of beauty.
Mark
I'll leave this to Paul to answer as I am unsure of his up to date pricing. The PH units I have are:
- SR5-27 external PSU
- TDR-21 dual 21V reg module
- 9V4 series reg mini module
- 5V shunt reg mini module
- Fine silver braided DC cable
HOWEVER - all my other mods are relevant, too. It gets expensive relative to the base cost of the deck, but that's missing the point. It performs to the equivalent of a far higher price point.
- Dynavector DV507-II arm
- Ebony armboard
- Funk Firm platter and Achromat
- Mike New bearing and base plate
- Isonoe feet
- Bruil weight
Thanks a lot Martin. I realise that the improvements are due to an accumulation of upgrades but I'm keen to choose a different and slightly more cost effective path. I'm thinking of employing the Vantage Audio mods together with an external PS and the regs mods you have been so diligently fitting and reviewing. Not the accepted upgrade path perhaps, but cashflow dictates necessity and I feel it would be both interesting and educational to pursue the alternatives![]()
Last edited by synsei; 25-01-2012 at 22:08.
Location: Northampton
Posts: 1,373
I'm Mark.
You could always try my Technics upgrade path Dave.
Okay, I'll get me coat.
Mark
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
You could always try my Technics upgrade path Dave.
Okay, I'll get me coat![]()
Location: Northampton
Posts: 1,373
I'm Mark.
With respect Marco you don't know that for sure. The SP10 is a superb deck and having heard Mark's unmodified specimen in his system I am deeply impressed by its grip and outstanding resolution of dynamics. I feel that if the same mod development idiom was deployed for the SP10 it is likely to eclipse the results achieved by the SL significantly...
Why, in your opinion, would the Techy SP10 not respond favourably to the type of mods available for the SL series, not including feet made out of materiel gleaned from the Ark Of The Covenant of course?![]()
Last edited by synsei; 25-01-2012 at 22:27.
Hi Dave,
It depends what you mean by "sure". I've heard about 7 different SP10s in the last 3 three years, most in direct comparison to my own T/T in the same system, which very good indeed, but none that I'd swap my modded Techy for.With respect Marco you don't know that for sure.
That's about as "sure" as I need to be
Do you honestly think that if I seriously thought that an SP10 was better, I'd not have gone out and bought one? You should know me by now, Dave - I don't do compromises...
I've not heard a 'tweaked' SP10, which I'm sure would be superb, but in my experience, the SP10's reputation far exceeds its actual ability (in stock from).
There... Now it's time to get MY coat!!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.