+ Reply to Thread
Page 15 of 35 FirstFirst ... 5131415161725 ... LastLast
Results 141 to 150 of 345

Thread: Technics 1210 internal regulation mods

  1. #141
    Join Date: Dec 2010

    Location: Northampton

    Posts: 1,373
    I'm Mark.

    Default

    Moi? No.

    Just think how pretty that series 3 would look mounted on a custom plinth with an SP-10 though. It would be a thing of beauty.
    Mark

  2. #142
    MartinT Guest

    Default

    Quote Originally Posted by synsei View Post
    Martin, what is the total cost of the mods you have fitted please?
    I'll leave this to Paul to answer as I am unsure of his up to date pricing. The PH units I have are:

    - SR5-27 external PSU
    - TDR-21 dual 21V reg module
    - 9V4 series reg mini module
    - 5V shunt reg mini module
    - Fine silver braided DC cable

    HOWEVER - all my other mods are relevant, too. It gets expensive relative to the base cost of the deck, but that's missing the point. It performs to the equivalent of a far higher price point.

    - Dynavector DV507-II arm
    - Ebony armboard
    - Funk Firm platter and Achromat
    - Mike New bearing and base plate
    - Isonoe feet
    - Bruil weight

  3. #143
    synsei Guest

    Default

    Thanks a lot Martin. I realise that the improvements are due to an accumulation of upgrades but I'm keen to choose a different and slightly more cost effective path. I'm thinking of employing the Vantage Audio mods together with an external PS and the regs mods you have been so diligently fitting and reviewing. Not the accepted upgrade path perhaps, but cashflow dictates necessity and I feel it would be both interesting and educational to pursue the alternatives
    Last edited by synsei; 25-01-2012 at 22:08.

  4. #144
    Join Date: Dec 2010

    Location: Northampton

    Posts: 1,373
    I'm Mark.

    Default

    You could always try my Technics upgrade path Dave.

    Okay, I'll get me coat.
    Mark

  5. #145
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,466
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Dingdong View Post
    Or flog it and get an SP-10...
    And end up with something (sonically) worse

    When you've heard just how good Martin T's or my deck sounds, SP10's barely raise a 'semi'!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  6. #146
    MartinT Guest

    Default

    Quote Originally Posted by synsei View Post
    I'm thinking of employing the Vantage Audio mods together with an external PS and the regs mods you have been so diligently fitting and reviewing.
    Yup, sounds like a good path to me, and plenty of people have written positively about the Vantage mods. Go for it, and keep us informed of your progress.

  7. #147
    synsei Guest

    Default

    You could always try my Technics upgrade path Dave.

    Okay, I'll get me coat

  8. #148
    Join Date: Dec 2010

    Location: Northampton

    Posts: 1,373
    I'm Mark.

    Default

    Quote Originally Posted by Marco View Post
    And end up with something (sonically) worse

    Marco.

    I know which one I prefer. Can you guess which one it is?
    Mark

  9. #149
    synsei Guest

    Default

    Quote Originally Posted by Marco View Post
    And end up with something (sonically) worse

    Marco.
    With respect Marco you don't know that for sure. The SP10 is a superb deck and having heard Mark's unmodified specimen in his system I am deeply impressed by its grip and outstanding resolution of dynamics. I feel that if the same mod development idiom was deployed for the SP10 it is likely to eclipse the results achieved by the SL significantly...

    Why, in your opinion, would the Techy SP10 not respond favourably to the type of mods available for the SL series, not including feet made out of materiel gleaned from the Ark Of The Covenant of course?
    Last edited by synsei; 25-01-2012 at 22:27.

  10. #150
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,466
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Hi Dave,

    With respect Marco you don't know that for sure.
    It depends what you mean by "sure". I've heard about 7 different SP10s in the last 3 three years, most in direct comparison to my own T/T in the same system, which very good indeed, but none that I'd swap my modded Techy for.

    That's about as "sure" as I need to be

    Do you honestly think that if I seriously thought that an SP10 was better, I'd not have gone out and bought one? You should know me by now, Dave - I don't do compromises...

    I've not heard a 'tweaked' SP10, which I'm sure would be superb, but in my experience, the SP10's reputation far exceeds its actual ability (in stock from).

    There... Now it's time to get MY coat!!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

+ Reply to Thread
Page 15 of 35 FirstFirst ... 5131415161725 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •