IMG_4417.jpgThe Trim is almost ready to attach to the cabinets.
Senior Member
Location: Victoria, Australia
Posts: 148
I'm David.
IMG_4417.jpgThe Trim is almost ready to attach to the cabinets.
Senior Member
Location: Sarf Lunnon
Posts: 2,068
I'm Dave.
In - Tweaked Lenco GL75, Linn Ittok, Ortofon Cadenza Black
Through - Croft Micro 25 RS LS, power R monoblocks, RIAA R. Ortofon ST-80 SE SUT.
Along - Tellurium Q Ultra Black cables
Out - Harbeth SHL5 Plus XD's
Street photography
Dave
Senior Member
Location: Victoria, Australia
Posts: 148
I'm David.
IMG_4421.jpgCreative clamping, when every clamp is never enough!!
Senior Member
Location: Surrey
Posts: 7,225
I'm Rob.
I would love to be able to hear these!
Buy Bose...And get your parking validated!.
https://youtu.be/ZCBe7-6rw4M
No Highs...No Lows....It Must Be Bose!
Senior Member
Location: Victoria, Australia
Posts: 148
I'm David.
Routed
All the trim has been routed and is ready to attach..........dare I say could be in the home straight or at least in sight of it.
AV Room Forum Leader / Spaced Out
Location: North Cambs UK, Earth, Sol, Orion - Cygnus arm of galaxy
Posts: 11,165
I'm MadeOfDeadGiantStarsThatExplodedEonsAgo.
Eagerly awaiting your impression of how they sound installed
I have routers & drills toCome on man, nearly there
Soon to be audio nirvana me thinks, low powered class A amps will enthrall
Bests, Mark
"We must believe in free will. We have no choice"Isaac Bashevis Singer
Senior Member
Location: Victoria, Australia
Posts: 148
I'm David.
MarkOriginally Posted by Reid Malenfant
Eagerly awaiting your impression of how they sound installed
I have routers & drills to
Soon to be audio nirvana me thinks, low powered class A amps will enthrall
You are reading my mind, scary! But seriously thanks so much for your encouragement along the way.
I have an Audio Research Ref 2 Mk2 Pre amp on order, used of course. What are your thought on Class A Power amps that would possibly match this.....tubes probably.
On the vinyl side I have a Linn with Ittock Arm and Dynavector 20dXX Cartridge and the Phono Stage is a Linto.
Those Westminsters will need control even if not a lot of power. How about EAR power amps, such as the 861?
http://www.ear-yoshino.com/products.php?catId=6#
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,680
I'm AudioAl'sArbiterForPISHANTO.
This is definitely in the top 5 (if not actually no1) of the best builds done on AoS, chaps, is it not?
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Certainly in the top 5, Marco. Fabulous build quality and attention to detail. I'd love to hear them when they're ready.
Posting Permissions
Reply With Quote
