So what kit will have the pleasure of taking all these lovely carts your acquiring andy?
Senior Member
Location: Berkshire uk
Posts: 1,744
I'm Allthatwasisorwillbe.
So what kit will have the pleasure of taking all these lovely carts your acquiring andy?
Darren
KORUS CUSTOM SERVER
TECHNICS 1200 MKII_JELCO 750D_SHURE SC35C (with NOS and NEO SAS styli)
CAIMAN SEG + DORADO PSU
CROFT MEGA MICRO
PARADIGM REFERENCE ACTIVE/40'S
PARADIGM SERVO 15 SUBWOOFER X 2
''The theory of relativity is a mass of error and deceptive ideas violently opposed to the teachings of great men of science of the past and even to common sense''
Senior Member
Location: Glasgow
Posts: 1,225
I'm andy.
Sorry for late reply, just finished a 2-9.30 shift.Originally Posted by DSJR
Not as sexy as the technics 205 is it
Still, enjoy the Shure, I know you will, very much I suspect
You're right Dave, the Shure is 2nd division when it comes to build and pride of ownership but i am gonna try it 1st, the 205 will be for special occasion.
Darren,using a Garrard 401 + Alphason HR100s just now, Lenco 59 waiting to be plinthed and various arms, quietly trying to snag a 301 cheap but no joy so far.
Frank...made me do it.
Senior Member
Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...
Posts: 14,540
I'm David.
The L59 should be amazing with the Shure. Does it have the metal arm or the curvy bakelite/plastic one? I've seen Russ Collinson's Lenco plinths and they really look the biz
I can't go on and I can't go back, I don't feel so matter of fact,
I tried and tried to make good sense, What's the good to try it all again?
Senior Member
Location: Glasgow
Posts: 1,225
I'm andy.
Dave, it hasn't got an arm on it at the moment, bought it a while back, put in a £50.00 bid and left it, through some freak of nature nobody else put a bid in, think the finishing coincided with Euro cup so got it for the starting price of £49.00.minted and runs a lot quieter than the 88 i had.
Frank...made me do it.
Senior Member
Location: Berkshire uk
Posts: 1,744
I'm Allthatwasisorwillbe.
Not sure why i asked really,as i have only ever heard a Technics 1200
Darren,using a Garrard 401 + Alphason HR100s just now, Lenco 59 waiting to be plinthed and various arms, quietly trying to snag a 301 cheap but no joy so far.
Darren
KORUS CUSTOM SERVER
TECHNICS 1200 MKII_JELCO 750D_SHURE SC35C (with NOS and NEO SAS styli)
CAIMAN SEG + DORADO PSU
CROFT MEGA MICRO
PARADIGM REFERENCE ACTIVE/40'S
PARADIGM SERVO 15 SUBWOOFER X 2
''The theory of relativity is a mass of error and deceptive ideas violently opposed to the teachings of great men of science of the past and even to common sense''
Senior Member
Location: Glasgow
Posts: 1,225
I'm andy.
You asked because you guessed i've held one back, a fully working but in bits waiting to be plinthed Dual 721 early model with EDS 1000 mk2 motor,Not sure why i asked really,as i have only ever heard a Technics 1200having read all the positives on here regarding that dj deck, i am wondering if i've backed the wrong DD deck,
hence it's still waiting to be housed for the last 2 years.
wii.
Frank...made me do it.
Senior Member
Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...
Posts: 14,540
I'm David.
Those Duals need some care. The motor may be better than that on my 701 (a mk1 version with noisy speed pots I think), but I'm not sure about the arm. Either that or standards dramatically changed in a couple of years. A more solid plinth can't do any harm though and I can advise on the arm bearings, suitable cartridges (not really the SC35C in my view) and sorting the wiring and springs to work better...
I can't go on and I can't go back, I don't feel so matter of fact,
I tried and tried to make good sense, What's the good to try it all again?
Senior Member
Location: Glasgow
Posts: 1,225
I'm andy.
Dave, when i bought my 721 it was in a home made plinth drill for a Rega arm already sans any Dual bits, but i didn't like the quality of the work so decided to toss the shoddy work, i bought it soley for the quality of that motor which i am led to believe it powers the Goldmund Reference TT's, is that right?.
Frank...made me do it.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,466
I'm AudioAl'sArbiterForPISHANTO.
Hi Dave,
Out of curiosity, why - what, in your opinion, is unsuitable about it?
Do bear in mind that I'm referring here to the original US version, not the shite (in comparison) that Shure make now!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: Glasgow
Posts: 1,225
I'm andy.
Marco, i think Dave was referring to the Dual arm and SC35c compatability, not the Tecnoarm + SC35c which i plan to put on.
Frank...made me do it.
Posting Permissions
Reply With Quote
