In reality it probably doesn't matter, but traditionally it goes in the positive lead![]()
In reality it probably doesn't matter, but traditionally it goes in the positive lead![]()
Bests, Mark
"We must believe in free will. We have no choice"Isaac Bashevis Singer
Location: Troon
Posts: 2,439
I'm tony.
Thanks...got the maplin stalwart psu in situ to good effect.I will try a battery when I get the bits together...
Regards Tony.
Location: Melbourne, Australia
Posts: 57
I'm Greg.
Finally got a HLLY tamp90 and have been running it in for a couple of days. Quite impressed with it and thought I would have a listen with the Caiman gator as a preamp (after moving the rca cables into the correct outlets at the back of the caiman), but I don't get any sound out. Any advice? Do i have to do something to the hlly?
Greg.
Hi Greg,
I assume the HLLY is an integrated amp, so you'll need to set it's volume at 50 to 75%, and use the active outputs from the Beresford.
But if it's integrated you're now going through 2 pre-amp stages, so I'm not sure how this will be of benefit, unless you mod the HLLY to be a power only amp.![]()
Cheers, Will
Location: Melbourne, Australia
Posts: 57
I'm Greg.
Thanks for that. Rather than fiddle around with turning it into a power amp I will enjoy it as an integrated amp. Its still improving after 72 hours of breaking in. Quite taken with it.
Cheers Greg.![]()
Greg.
Greg, do keep us informed, interesting bit of kit that![]()
System; Michell Gyrodec SE/ Orbe Clamp/ Gert Pedersen armboard mod/ HR PSU/ SME V / J7 Tonearm cable/Ortofon Cadenza Black// Jez Arkless Turbo nutter B------ /Trichord Dino+
Amplification and loudspeaker set up is at the moment being split into two groups, comprising the following;
1. Same sources as above; SONY TAF-770ES/SONY CDP761E/Cable Talk 3.1 loudspeakercable/ Harbeth Compact7ES2/ Stands
2. Virtue Audio Sensation M451battery PSU, ClarityCaps upgrade/ Sensation M901/Russian PIO caps with Teflon bypass caps upgrade/ JT Dynamic PSU with various tweaks/ Connex Audio 5N Litz loudspeaker cable, Impulse H6 Loudspeakers.
Me so horny- Impulse H6 Horny
Took me a few days to wade through this thread, but the Class D amps look to good to be true. Anyway, have a Bantam Gold on its way to me, it's a power amp only version, without the Alps pot. John @ Temple Audio now has faceplates for the Gold that don't have the "pot" hole.
I'll be using it with a Tentlabs volume control preamp, with an active buffer stage (Chevron Audio Pre-amp). The "buzz" has led me to have high expectations of this amp, and I'll be seeing if I like it better than my Avondale audio S100.
Intel NUC/Chevron Audio NDF16 dac/Amptastic Mini-1/Audium Comp 5
Mains Block: Custom-HiFi-Cables PowerBlack Distribution Block (with super conditioner).
Connected with Reference Fidelity Components Super Neptunes and Speaker Cables.
Powered by Custom-HiFi-Cables DC2 psus
please feedback Peter
Loves anything from Pain of Salvation to Jeff Buckley to Django to Sarasate to Surinder Sandhu to Shawn Lane to Nick Drake to Rush to Beth Hart to Kate Bush to Rodrigo Y Gabriela to The Hellecasters to Dark Sanctury to Ben Harper to Karicus to Dream Theater to Zero Hour to Al DiMeola to Larry Carlton to Derek Trucks to Govt Mule to?
Humour: One of the few things worth taking seriously
I think you will be surprised at just how good these little amps are Peter. Also, bear in mind a further improvement can be had with a better PS.
Should be trialling a set of the Bantam monoblocks next week, let y'all know how I get on.
Ok with not having it on Betamax nowadays