Cheers for that post & picture Chris & Willthis is precisely what i have been attempting to get accross - there is more than one type of each coloured cable
Some people just don't listen![]()
Cheers for that post & picture Chris & Willthis is precisely what i have been attempting to get accross - there is more than one type of each coloured cable
Some people just don't listen![]()
Bests, Mark
"We must believe in free will. We have no choice"Isaac Bashevis Singer
Location: Lancaster(-ish), UK
Posts: 16,936
I'm ChrisB.
My 'old whites', bought from the original Ebay ad that was on the OP here didn't have a construction diagram on the box (I still have those boxes), or I'd have scanned that too.
Chaps I think I've dropped a proverbial bollock!
The white single one, is a Digital Coax cable
Hence only one in the box, I was looking for analogue RCA, oh no, and I've ordered another
One assumes these are not appropriate as analogue interconnects
Can anyone please advise before I go begging to the vendor?
Cheers, Will
They'll be 100% fine for an audio interconnect![]()
Bests, Mark
"We must believe in free will. We have no choice"Isaac Bashevis Singer
'Digital' cables will work perfectly well as audio interconnects.
To be a good digital cable, the cable ought to have a characteristic impedance of 75 Ohm and have low loss, appropriate to the high frequencies it handles. All of these attributes are largely irrelevant at audio frequencies, but certainly do no harm.
Use with confidance.
Regards
Barry
The 'new' grey ones appear to be the same contsruction as the 'old' white ones (which were different to the 'old' grey ones). As far as I'm aware, all the white analogue ones are the same (the picture Will posted is the white digital co-ax, which isn't the same construction as the white analogue cable). I've got white ones with and without the construction shown on the box.
Are the 'new' grey ones designated AD80300qnXM (where 'X' is 1, 2 or 5 depending on the length)?
Keith
Analogue: Lenco L75 with 'PTP5' top plate in heavy birch ply plinth/re-wired Rega RB300/SAE 1000e HOMC Cartridge/Trans-Fi Reso-Mat/Moth RCM
Files: Voyage MPD/Custom PC/Supra USB/Beresford ASYNCH-1/Beresford TOSlink cable
CDP: Inca Katana SE
DAC: Beresford Caiman MkII (LiPo Battery powered)
Pre-Amp: Croft Micro 25 Power-Amp: Croft Series 7
Speakers: DIY Frugel-Horn Mk3 ('FH3') + REL Strata subwoofer
Headphones: Beyer Dynamics DT990 Pro (250 ohm)/Schiit Asgard Headphone Amp
Cables - Interconnects: Mark Grant G1000HD Speaker Cables: Van Damme Blue
Mains: Belkin PF30/Mark Grant DSP2.5 & DSP1.0 Rack: Target
Office System: HP Win8 Laptop/JRiver/MF V-Link2/Beresford Bushmaster MkII/Topping TP20 Mk2/Mission 771e
Bedroom System: Raspberry Pi/Raspbrian + MPD/HiFiBerry DAC/Topping TP20 Mk2/Mission 760i or DIY Hybrid Valve-MOSFET Headphone amp + Sennheiser HD595
Gallery
Location: Lancaster(-ish), UK
Posts: 16,936
I'm ChrisB.
My grey ones are supposed to be 'composite video' cables, they do the job just fine!
Cheers Mark, that's a relief as he's already dispatched the second one
So what if any would be the difference between the white digital coax, and the white analogue...apart from the fact that analogue would come as a pair
The wording on the box, or something more fundamental![]()
Cheers, Will
Cheers to everyone for the reassurance...my day is re-made![]()
Cheers, Will
Location: Lancaster(-ish), UK
Posts: 16,936
I'm ChrisB.
I posted somewhere way up there about the difference I found between the two types I have. (Not the ones you want to compare, but I'd imagine the differences would be of the same order of magnitude).