Thats a good pic Neil, i have just noticed this topic now has its own thread "modding a 103" in analoge art.Originally Posted by Yomanze
Ah, John got there first, here's a pic anyway:
Marco must have thought it was taking over his technics thread
Senior Member
Posts: 116
Thats a good pic Neil, i have just noticed this topic now has its own thread "modding a 103" in analoge art.Ah, John got there first, here's a pic anyway:
Marco must have thought it was taking over his technics thread
Regards, John.
Senior Member
Location: Warrington
Posts: 3,438
I'm Neil.
Hey guys, after playing around with Baerwald alignment for a while, I actually noticed more distortion on the inner tracks. I would def. have a play around as YMMV, but the standard Stevenson alignment seems to be the way forward for the SL1210 with stock tonearm. Not that I have a choice anyway now since adding a big hunk of brass
John, the pic above was just about spot-on with Stevenson alignment! How strange.
Senior Member
Location: Paris, France
Posts: 790
I'm Peter.
I went back to Stevenson, more or less. But you can make your own decision about where you want the inner null point to be. You need to have an idea about where yje last tracks end on your vinyl. Today, with double LPs most of the time for a CD equivalent they're quite far out from the centre.Hey guys, after playing around with Baerwald alignment for a while, I actually noticed more distortion on the inner tracks. I would def. have a play around as YMMV, but the standard Stevenson alignment seems to be the way forward for the SL1210 with stock tonearm. Not that I have a choice anyway now since adding a big hunk of brass
John, the pic above was just about spot-on with Stevenson alignment! How strange.
But that 60s/70s/80s is a different story.
Intel NUC/Chevron Audio NDF16 dac/Amptastic Mini-1/Audium Comp 5
Mains Block: Custom-HiFi-Cables PowerBlack Distribution Block (with super conditioner).
Connected with Reference Fidelity Components Super Neptunes and Speaker Cables.
Powered by Custom-HiFi-Cables DC2 psus
Senior Member
Location: Paris, France
Posts: 790
I'm Peter.
My Kab PSU, tonearm rewire have landed, now to get them fitted...
Intel NUC/Chevron Audio NDF16 dac/Amptastic Mini-1/Audium Comp 5
Mains Block: Custom-HiFi-Cables PowerBlack Distribution Block (with super conditioner).
Connected with Reference Fidelity Components Super Neptunes and Speaker Cables.
Powered by Custom-HiFi-Cables DC2 psus
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,466
I'm AudioAl'sArbiterForPISHANTO.
Way hey... Nice one, dude. Now the fun begins!
We expect some nice pictures and a full write-up, of course...
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: Paris, France
Posts: 790
I'm Peter.
In due course. The PS fit looks easy, even for me. The tonearm more complicated. I need a US mains plug, tho. Coz, The original power cable has to attach to the PS for the on/off switching. Of course my power cable is 2 pin continental, that doesn't fit the Kab "Sense" socket.
cheers
Intel NUC/Chevron Audio NDF16 dac/Amptastic Mini-1/Audium Comp 5
Mains Block: Custom-HiFi-Cables PowerBlack Distribution Block (with super conditioner).
Connected with Reference Fidelity Components Super Neptunes and Speaker Cables.
Powered by Custom-HiFi-Cables DC2 psus
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,466
I'm AudioAl'sArbiterForPISHANTO.
That's interesting, Peter. With my deck/PSU all the cables/plugs I needed came with it - all were 'UK-friendly' and ready to go!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: Paris, France
Posts: 790
I'm Peter.
I've got a Euro mains cable but there's a socket on the back of the PSU, that's labelled "sense" or something like that. The original power cable goes in there so that you can switch the deck on & off as before. There's a cable that takes 30v to the deck that goes in a little socket at the bottom right of the back of the PS.
regards
Peter
Intel NUC/Chevron Audio NDF16 dac/Amptastic Mini-1/Audium Comp 5
Mains Block: Custom-HiFi-Cables PowerBlack Distribution Block (with super conditioner).
Connected with Reference Fidelity Components Super Neptunes and Speaker Cables.
Powered by Custom-HiFi-Cables DC2 psus
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,466
I'm AudioAl'sArbiterForPISHANTO.
Peter,
When I got my deck there was a flat black & white cable running from the back of the deck (connected internally) fitted with a flat-pinned two-pin plug on the end that connects to the 'sense' socket on the back of the KAB PSU, and a small thin grey DC cable supplied which connects on one end to the underneath of the deck and the other to the 30V DC socket on the back of the PSU.
On top of that, a good quality mains lead fitted with a 13A plug was supplied to plug the PSU into the mains.
There was no need for me to find any separate plugs or whatever so I don't know what's going on there
Maybe it's different when KAB supplies the stuff separately for self-assembly?
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,466
I'm AudioAl'sArbiterForPISHANTO.
Calling Paris!
Have you seen this message, Peter?
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Posting Permissions
Reply With Quote
