+ Reply to Thread
Page 12 of 31 FirstFirst ... 2101112131422 ... LastLast
Results 111 to 120 of 310

Thread: Just won these on Ebay......

  1. #111
    Join Date: Nov 2010

    Location: Chorley, Lancs

    Posts: 2,747
    I'm Mike.

    Default

    tweeters are fine and yes they do sound good, just taken one apart and found a nice simple crossover as well as a rather large dead spider, poor bugger probably crawled in when they were made.

    Do you think a set of hardboard or thin MDF grill frames with acoustic fabric covers would be ok, and also be able to be velcroed on the the speaker front's

  2. #112
    Join Date: Jul 2010

    Location: North Cambs UK, Earth, Sol, Orion - Cygnus arm of galaxy

    Posts: 11,165
    I'm MadeOfDeadGiantStarsThatExplodedEonsAgo.

    Default

    Quote Originally Posted by Jac Hawk View Post
    tweeters are fine and yes they do sound good, just taken one apart and found a nice simple crossover as well as a rather large dead spider, poor bugger probably crawled in when they were made.

    Do you think a set of hardboard or thin MDF grill frames with acoustic fabric covers would be ok, and also be able to be velcroed on the the speaker front's
    All good news The spider probably crawled in through the port

    Yes i don't see why you can't make some grills as you describe, just leave as much space around the drivers as possible so you don't get reflections from the edge of the wood. If you happen to have a branch of John Lewis near you, they sell some very acousticly transparent material. Not 100% sure on the name of the stuff but Polyester Jersey or somesuch name rings a bell
    Bests, Mark



    "We must believe in free will. We have no choice" Isaac Bashevis Singer

  3. #113
    Join Date: Nov 2010

    Location: Chorley, Lancs

    Posts: 2,747
    I'm Mike.

    Default

    i'm still a bit worried that the speakers will still be a little boomy even upstairs, is there any way this can be reduced, maybe by filling the void inside the cab with loose filling? any suggestions

  4. #114
    Join Date: May 2008

    Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...

    Posts: 14,540
    I'm David.

    Default

    Castles tended to have a smooth and if anything, slightly dry presentation, so you may not find the need to damp the bass further except possibly lining the port if necessary to minimise "chuffing."
    I can't go on and I can't go back, I don't feel so matter of fact,
    I tried and tried to make good sense, What's the good to try it all again?

  5. #115
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 111,027
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    i'm still a bit worried that the speakers will still be a little boomy even upstairs, is there any way this can be reduced, maybe by filling the void inside the cab with loose filling? any suggestions
    Hi Mike,

    Unless you have a really bad room and/or an amp with the grip of a damp piece of lettuce, bass boom won't be an issue with the Dittons

    Put them on a good pair of stands (I use Atacamas) away from side walls and use them with 'clean' sounding speaker cables (I use Van Damme) and you'll be away nicely!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  6. #116
    Join Date: Nov 2010

    Location: Chorley, Lancs

    Posts: 2,747
    I'm Mike.

    Default

    Quote Originally Posted by DSJR View Post
    Castles tended to have a smooth and if anything, slightly dry presentation, so you may not find the need to damp the bass further except possibly lining the port if necessary to minimise "chuffing."
    and just how would do that, what would i use?

  7. #117
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 111,027
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Lol - I've just realised that you were talking about the Castles not the Dittons, sorry, Mike!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  8. #118
    Join Date: Nov 2010

    Location: Chorley, Lancs

    Posts: 2,747
    I'm Mike.

    Default

    Quote Originally Posted by Marco View Post
    Lol - I've just realised that you were talking about the Castles not the Dittons, sorry, Mike!

    Marco.
    Castles, dittons they're all speakers to me mate.

    I would apreciate any advice on how to control the bass though, dave said to line the bass ports, but i'm not sure how to do it or what to use.

    Also there are some marks on the cabs, not scratches but more like someone has been using them as a table to draw on, so the veneers are "bruised" i think that's the correct term, anyway, i'd also like some sugestions if anyone has any on how to lift these marks, i have a feeling it may be possible with a hot steam iron and a towel but i'm not sure and i don't want to damage the cabs anymore than needs be...

  9. #119
    Join Date: Feb 2008

    Location: Wirral, UK.

    Posts: 674
    I'm fightingmywayoutofawetecho.

    Default

    Quote Originally Posted by Jac Hawk View Post
    Castles, dittons they're all speakers to me mate.

    I would apreciate any advice on how to control the bass though, dave said to line the bass ports, but i'm not sure how to do it or what to use.

    Also there are some marks on the cabs, not scratches but more like someone has been using them as a table to draw on, so the veneers are "bruised" i think that's the correct term, anyway, i'd also like some sugestions if anyone has any on how to lift these marks, i have a feeling it may be possible with a hot steam iron and a towel but i'm not sure and i don't want to damage the cabs anymore than needs be...
    Try the drinking straw trick Mike...used to work for me with Castle Richmonds

    Ian.
    My System:

    Linn Akurate DSM,Naim 32.5 pre amp Hicap,Naim Snaxo Hicap,3x Naim 250 power amps,Active Naim NBLs.
    Dave Hewitt MR PLANK 4 watt SE and Jm Lab Electra 905s.

  10. #120
    Join Date: Nov 2010

    Location: Chorley, Lancs

    Posts: 2,747
    I'm Mike.

    Default

    Quote Originally Posted by Ian Walker View Post
    Try the drinking straw trick Mike...used to work for me with Castle Richmonds

    Ian.
    Bloody hell i just got an IM off chris, he said someone was bound to come up with the straw trick, great minds and all that...

+ Reply to Thread
Page 12 of 31 FirstFirst ... 2101112131422 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •