I wonder if I should reserve one, just in case....
Senior Member
Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...
Posts: 14,540
I'm David.
I wonder if I should reserve one, just in case....
I can't go on and I can't go back, I don't feel so matter of fact,
I tried and tried to make good sense, What's the good to try it all again?
Senior Member
Location: Cardiff
Posts: 111
I'm Mike.
I'll put my name down for one of these as well
Senior Member
Location: West Yorkshire
Posts: 1,800
I'm Stephen.
Ditto please
Steve
Trade: Ammonite Acoustics
Location: Norwich
Posts: 2,810
I'm Hugo.
I do not have a production update as of today, but it should not be long now!
Trade: Ammonite Acoustics
Location: Norwich
Posts: 2,810
I'm Hugo.
GOOD NEWS!
I now have 10 Jelco collars and have made up packs containing:
One machined collar in plain bead blasted natural alloy
One fitted M6 grubscrew
One small nylon stub (optional use to cushion the grub screw against the arm pillar)
Three Stainless Steel M4/25mm Cap Head bolts with nuts and washers
One Allen key for grub screw setting.
Price including Royal Mail Special delivery Next Day is £35.
Can everyone who expressed interest please PM me to confirm their order? Where possible, I would prefer to be paid via PayPal, so please give an e-mail address so that I can send a PayPal invoice. Other forms of payment will of course be accepted!
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,675
I'm AudioAl'sArbiterForPISHANTO.
PM sent
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: London
Posts: 2,094
I'm colin.
Will it fit the Jelco 250?
Trade: Ammonite Acoustics
Location: Norwich
Posts: 2,810
I'm Hugo.
Yes it will.Originally Posted by colinB
Trade: Ammonite Acoustics
Location: Norwich
Posts: 2,810
I'm Hugo.
Marco has asked if the collar is easy to fit. It is a simple matter of unbolting the old Jelco collar and bolting in the new one.
The radius of the collar is 1mm larger than the original one, which is no problem for SL1200 users who have Sound HiFi's Jelco armboard. The top section of the custom collar is 5mm taller than the Jelco one, so please make sure that your arm, as currently set up in its original collar, has at least 5mm of bare arm pillar showing above the collar. If there is less than 5mm showing, then the arm may not go down low enough to ensure correct VTA when using my collar. Hamish did kindly send some photos of his Jelco 250ST sitting in a Technics and that had plenty of clearance, so hopefully nobody will have a problem - but do make sure!
Here is what the kit contains (also a brief instruction sheet):
New Member
Location: Toronto, Canuckistan
Posts: 20
I'm Bob.
Shuggie, Will it fit Soundsupports armboard? If it will, I'd like to order one. The only problem, I am either too tired or too stupid to find how to send you a PM.
Posting Permissions
Reply With Quote