There is a website www.paulhynesdesign.com but it's a bit long in the tooth and the SR5 is not shown. I posted a picture of the SR5 on this thread http://theartofsound.net/forum/showp...38&postcount=1

Paul does lurk here on AoS and may chip in, but if you want to know more about the SR5, give him a call as he's a helpful chap.

Wonder if it also can be used for the Stanton 150 turntable ?
If it needs a DC supply and draws less than 4A continuous, then the SR5 would probably suit; however the cheaper and smaller SR3 shown in my picture would probably do the trick too. 4A is theoretically overkill, but on my Kenwood KD-770D, it does make a remarkable difference over the smaller power supply.