+ Reply to Thread
Page 4 of 7 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 63

Thread: Accuphase M-60 Love

  1. #31
    Join Date: Jan 2013

    Location: Bristol

    Posts: 7,244
    I'm Justin.

    Default

    Inflation adjusted Gemini AI estimates the current retail price would be £15-22K.

    Food for thought.

    Dodgy flash pic of the other side. I've posted these for reference in case some future dude is interested in doing the same.

    The thermal compound I used is insanely expensive I think and you can see the excess which I will wipe away. This stuff doesn't dry out.

    The new relay is inside the housing behind the resistor. However, it needs screwing back in which is very fiddly. Will do it tomorrow. If it stays powered up, then the DC offset needs trimming followed by transistor bias adjustment.

    That ceramic resistor I think must be wider than the original sand cast item. I will probably add an insulator either side to be safe.

    Also, I just used some existing mains cable wire I had hanging around to do the job (yellow and green stuff). This is not following convention, but that won't hurt.

    Last edited by User211; 07-03-2026 at 21:46.

  2. #32
    Join Date: Jan 2013

    Location: Bristol

    Posts: 7,244
    I'm Justin.

    Default

    Did it work?

    Nope.

    Ego bruised.

    97% sure it was all plumbed in correctly.

    Something else must be busted.

  3. #33
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 43,284
    I'm Martin.

    Default

    That's a shame but you'll track it down.

    You have spare amps to use while all this is going on?
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.

  4. #34
    Join Date: Jan 2013

    Location: Bristol

    Posts: 7,244
    I'm Justin.

    Default

    Yup Luxman M-800A and Austria Analogue 211 monoblocks.

    It's a challenge. Will get there eventually.

  5. #35
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 43,284
    I'm Martin.

    Default

    Right. as long as your not slumming it then
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.

  6. #36
    Join Date: Jan 2013

    Location: Bristol

    Posts: 7,244
    I'm Justin.

    Default

    Nope. Really like swapping different amps in. Cures yearning for upgrades all the time cos you get fed up with an option.

    This wisdom has been learnt through many years. Works for me, anyway

  7. #37
    Join Date: Jan 2009

    Location: Essex

    Posts: 37,648
    I'm openingabottleofwine.

    Default

    I have two sets of spare monoblock amplifiers I can use should my current amps develop a fault. I don't chop and change amplifiers just for the sake of it.
    Barry

  8. #38
    Join Date: Jan 2013

    Location: Bristol

    Posts: 7,244
    I'm Justin.

    Default

    Barry don't you swap your alternatives in every now and then?

    If not, why not?

    FWIW this M-60 fix may not be fast. It may span over months. However, if I get some time off, expect rapid attention and a quick sort out. I haven't been giving it much time, really. An hour or two max per week.

  9. #39
    Join Date: Jan 2009

    Location: Essex

    Posts: 37,648
    I'm openingabottleofwine.

    Default

    Quote Originally Posted by User211 View Post
    Barry don't you swap your alternatives in every now and then?

    If not, why not?

    FWIW this M-60 fix may not be fast. It may span over months. However, if I get some time off, expect rapid attention and a quick sort out. I haven't been giving it much time, really. An hour or two max per week.
    No, not now. I used to be a bit of an amplifier 'swapper', even to the extent of trying out classic amplifiers such as the Radford STA-15 III, or the Electrocompaniet "The Two Channel Audio Amplifier", both of which, in their own way, sounded excellent with my Quad 57 ESLs.

    These days however, I'm quite happy to leave my Quad 510s in situ with a set of 'monoblocked' and upgraded (to Keith Snook Level 3) Quad 405s, and Mark Levinson ML-2 amps in reserve should the 510s develop a problem.
    Barry

  10. #40
    Join Date: Jan 2013

    Location: Bristol

    Posts: 7,244
    I'm Justin.

    Default

    Currently just the 3 sets of M-60s available on eBay.

    All the same pair. All different prices. All from the same 99.5% feedback seller.

    Curious.


+ Reply to Thread
Page 4 of 7 FirstFirst ... 23456 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •