+ Reply to Thread
Page 17 of 21 FirstFirst ... 71516171819 ... LastLast
Results 161 to 170 of 203

Thread: Occasional hum

  1. #161
    Join Date: Mar 2014

    Location: KY - Scotland

    Posts: 5,509
    I'm Mike.

    Default

    Have you tried a different phono stage?

    I'm assuming you have and if it removed the noise and it was me I'd be putting a different one into play especially if it was bugging me.

  2. #162
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 7,196
    I'm Kevin.

    Default

    Yes. No problems with the other phono stages. The Reflex M and Accession M both work fine, but I have to keep shipping them out when people want to borrow them.
    The AG1500 removes the problem on the BB3, so I have noisy mains that the BB3 is susceptible to.
    Ideally I want a simple solution to get rid of that noise, that I can fit inside the case.
    If I can't do that, I will keep the AG1500 in place.
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  3. #163
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 43,381
    I'm Martin.

    Default

    I'm not convinced about the noisy mains thing, everyone's mains is noisy. If it was a real problem hi-fi wouldn't exist.

    Is it not more likely it's some sort of ground loop? Using the AG1500 might be fixing that?
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.

  4. #164
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 7,196
    I'm Kevin.

    Default

    Now I know it is most likely to be a 100Hz interference signal, I am also thinking it is a ground loop issue.
    But why is it just the analogue part of the system affected?
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  5. #165
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 43,381
    I'm Martin.

    Default

    ground loops can be buggers especially if the set-up is complex i.e lots of boxes.

    The BB3 will probably be fine in a different system.
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.

  6. #166
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 7,196
    I'm Kevin.

    Default

    I am going to swap my pre out, and see if it is a mixture of SE and Balanced connections.
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  7. #167
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 7,196
    I'm Kevin.

    Default

    But thinking about the last statement, the noise was present when the BB3 was the only thing connected to the mains, and the audio clip was done. It fed the PC sound card directly, so a change of Pre is not going to help.
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  8. #168
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 43,381
    I'm Martin.

    Default

    The PC was connected to the mains though? And the phono stage was connected to the PC?

    Load of ground loop threads here https://www.audiosciencereview.com/f...=ground+loop&c[title_only]=1&o=relevance

    You might find a solution there - or at least more things you can try.
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.

  9. #169
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 7,196
    I'm Kevin.

    Default

    I have just altered the grounding “scheme” of my BB3, and the hum has reduced significantly.
    It is not 100% gone, but I am almost there.

    I do have to point out that it is with the volume cranked right up at levels I do not normally use, with no music playing.
    I am almost at a point now where the hum is acceptable.
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  10. #170
    Join Date: Jun 2015

    Location: London/Durham

    Posts: 7,474
    I'm Lawrence.

    Default

    Quote Originally Posted by CageyH View Post
    I do have to point out that it is with the volume cranked right up at levels I do not normally use, with no music playing.
    I am almost at a point now where the hum is acceptable.
    Is this more to do with the fact you know it's there rather than the impact on the music then? I'd try and live with it for now and you might forget about it.

+ Reply to Thread
Page 17 of 21 FirstFirst ... 71516171819 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •