+ Reply to Thread
Page 4 of 23 FirstFirst ... 2345614 ... LastLast
Results 31 to 40 of 224

Thread: Going Linear with the Caiman

  1. #31
    MartinT Guest

    Default

    It's a 2.1mm DC plug, if I remember correctly.

  2. #32
    Join Date: May 2008

    Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...

    Posts: 14,540
    I'm David.

    Default

    2.1mm inner pin? You can get these on fleabay in long and short versions for very little dosh. The X-10D uses the same type..

    If you're ordering other bits from RS, this 2.1mm plug-n-lead is available -

    2.1mm DC Adaptor Cable (294-7030)
    I can't go on and I can't go back, I don't feel so matter of fact,
    I tried and tried to make good sense, What's the good to try it all again?

  3. #33
    Join Date: Oct 2008

    Location: Glasgowshire

    Posts: 10,638
    I'm Gary.

    Default

    Quote Originally Posted by StanleyB View Post
    You get a better signal to noise ratio, which brings out a bit more detail.
    Thanks Stan!
    Its a Go!
    Ok with not having it on Betamax nowadays

  4. #34
    MartinT Guest

    Default

    Quote Originally Posted by StanleyB View Post
    You get a better signal to noise ratio, which brings out a bit more detail.
    Agreed, that's what I'm hearing with the linear supply.

  5. #35
    Join Date: Feb 2008

    Location: http://www.homehifi.co.uk

    Posts: 6,289

    Default

    It's a great idea to try linear if you are also going to try the passive output mod.

  6. #36
    Join Date: Jul 2010

    Location: Co Durham

    Posts: 50

    Default

    Stan, did I remember correctly you saying that 15-16V 3A would be fine for the linear power supply. If so I came across these, I've not seen regulation as good as this, 0.25 mV RMS ripple! http://www.acopian.com/store/9-(7).aspx model A15MT300 (15-15.5 V 3 A). For $215 it's a bit more than your CB power supply but 0.005% regulation
    ''You canna break the laws of Physics Jim"

    Andy.

  7. #37
    Join Date: Sep 2009

    Location: London, UK

    Posts: 309

    Default

    ... plus $25 for 230V option. Ugly as hell but if it works. One question though is if it hums at all ?

  8. #38
    Join Date: Jul 2010

    Location: Co Durham

    Posts: 50

    Default

    Good question. I'm trying to see if there is a UK based distributer to get hold of a sample to see what they are like. Spec's though are amazing!
    ''You canna break the laws of Physics Jim"

    Andy.

  9. #39
    Join Date: Feb 2008

    Location: http://www.homehifi.co.uk

    Posts: 6,289

    Default

    Quote Originally Posted by OLED View Post
    Stan, did I remember correctly you saying that 15-16V 3A would be fine for the linear power supply. If so I came across these, I've not seen regulation as good as this, 0.25 mV RMS ripple! http://www.acopian.com/store/9-(7).aspx model A15MT300 (15-15.5 V 3 A). For $215 it's a bit more than your CB power supply but 0.005% regulation
    Are you trying to crack a nut with a hammer? The Mastech HERE is almost as good and a mere fraction of the price. If I could get hold of these in the UK or they did a 240V version I would get a few.

  10. #40
    Join Date: Aug 2009

    Location: New Zealand

    Posts: 27

    Default They do a 220v/50hz

    Quote Originally Posted by StanleyB View Post
    Are you trying to crack a nut with a hammer? The Mastech HERE is almost as good and a mere fraction of the price. If I could get hold of these in the UK or they did a 240V version I would get a few.
    http://www.mastechpowersupplies.com/...y-hy1803d.html

    220v/50hz for US$69.95

    Frizzup

+ Reply to Thread
Page 4 of 23 FirstFirst ... 2345614 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •