I just rewired my Techy 1200 stock arm with Cardas wire from TT through the arm to head shell and Klotz MC5000 from TT to the phono stage, a very worthwhile improvement IMO, cleaner, more dynamic range and more musical that the Rega RB250 and Origin live arm board I had in there.
I didn't use the pull through method I dismantled the arm bearings and arm tube so I could replace the arm tube ground lead.
Be careful when soldering the wire bundle to the head shell mount, as per the video ref above, fit a head shell into the mounting and I used a heat shunt whilst soldering so as not to damage the fragile springs.
I also wrapped the harness with a double layer of gas thick version PTFE tape for the section in the arm tube
Alan
Turntable - Garrard 401/Jelco 750L/Ortofon Kontrapunkt B, Pioneer PLC 590, Micro Sieki MA505 , Denon DL103R - DIY Paradise Phono stage - Reel 2 Reel Studer A810, Otari MX55,Tascam BR20, Revox A77, B77, PR99, TEAC X1000 & 3440, Digital HTPC / Young Dac - Preamp - DIY B4, 821, Power Amp's DIY Avondale NCC300 Mono Block, Speakers Wilmslow Kit Volt BM220.8 / Scanspeak D2905/9500