Cheap upgrade for michell gyro

[gwernaffield]

just to update ,, you do not have to buy the bearings if you do not want to , this would leave the Michell bearings in the posts ,, so no need to remove them when fitting and no risk of loosing them either , the bearings are just to complete a further upgrade,,if you want them .. the price with out the bearings is £130,, with the bearings £150 ,, made to measure are £180 with out the bearings,, and with £200,,
all will have spare O rings ,,

The ceramic bearing is just a further upgrade to those who wish to do this,, along with the bearing ball in the main bearing ,, and come with the higher payment ,, along with the sorbothane parts ,,
there is no risk if the O Ring snapped, as the rest is held in place with the further 5 O rings,, ,,
the basic kit is £130 ,, ,,this Is an Exceptional Value product that comes in a plain box,, with NO Strings Attached,, they work straight out of the box, no need to measure if you do not want to ,,
as the tests have shown they will take considerable force to break the O Rings,, due to the design not being a one piece material threaded through the base and nut they can take the weight Placed on them ,, unlike a one piece material that is threaded through the nut and base it will only take 6 kg before it may fail in my opinion ,, Peter's Pylons use a total of 6 rings on each post ,each single o ring will take 6.5 -7.5 kg ,,, not just 6 kg ,,using a one piece material that is threaded through the nut and base,, they are designed to fit into both chassis holes, to give better stability ,location onto the designed Michell engineering points for the suspension ,,
ATB
pete