Bel Canto Phono3 MM / MC phonostage

[Open Door]

In excellent condition with original manual and box. Black in colour.

£Sold incl UK postage.

Bandwidth • 1Hz-50KHz
RIAA Accuracy • 20Hz-20KHz +/- 0.2 dB
Signal to Noise Ratio 40 dB gain • >80 dB A weighted, re 5mV RMS in Distortion @ 2 Volt RMS/1kHz • <0.01%
Maximum Output Level • 9.5 V RMS
Output Impedance • 100 Ohms Single Ended
Input Impedance • 47K Ohms Nominal (all Resistor Switches UP)
Gain Level Options • 40 dB (100X) and 60 dB (1000X)
Idle power draw • 10 Watts
Dimensions • 8.5” W x 12.5” D x 3” H (216 mm x 318 mm x 75 mm) Weight: • 10lbs. (4.5 kg)

The Bel Canto Phono3 is designed to provide low noise operation for moving coil and moving magnet phono car- tridges and high accuracy audio RIAA equalization:
• All analog, low noise, low distortion Class A integrated circuit architecture. • High Current output buffer for driving
any load.
• 4-layer PC board design for superior
signal routing, grounding and power
supply routing.
• Latest generation of low-noise, low-dis-
tortion high speed audio amplifiers,
and output drivers provide superb meas- ured and subjective audio quality.
• Multi-stage power supplies for precise power to the sensitive analog circuitry • Precision audio grade resistors and
precision metal foil film capacitors in
the audio signal path.
• Ultra low noise second stage dual inde-
pendant regulation for the analog amplifier sections.
• Single-stage amplifier and classA oper- ation to insure minimal signal degreda- tion and maximum dynamic perform- ance.
• Rear Panel gain and load switching using precision sealed double wiping gold contact switches.

IMG_2385.jpgIMG_2386.jpg