Paul Hynes Audio Ltd new manufacturing facility is now operational. This facility has been set up to take over production and administration of my Paul Hynes Design product range. It is not possible to transfer the whole range at once due to the size of the range, the time required for the product documentation and the staff training on the production line, so over the next few years I will gradually transfer the Paul Hynes Design product range to the new manufacturing facility. I will post a notification on my forum trade thread when each product is transferred for availability from the new manufacturing facility. A web site for Paul Hynes Audio Ltd is currently under development and I will also post a notice when this is on-line.

I have already transferred two products into the new company. The very popular SR3 power supply previously sold by myself as Paul Hynes Design and the new lower cost Paul Hynes Audio SR2 power supply designed as a low cost upgrade for both switching and linear wall-warts and other external power supplies, supplied with many audio products nowadays.

The SR2 power supply can provide 1.4 amps DC and is available in the following DC voltages :- 3v3, 5v, 6v, 7v, 9v, 12v, 15v, 18v and 21v. The SR2 is supplied with a mains lead and a DC lead terminated with a DC plug to suit your equipment DC jack. Alternative connectors can be fitted if required at extra cost. The SR2 power supply costs £195.

The latest model of the SR3 power supply is available in the following DC voltage/current ratings :-
3v3 2A, 5v 3A, 6v 2A, 7v 2A, 9v 2A, 12v 2A, 15v 1.6A, 18v 1.4A, 21v 1.4A. The SR3 is a higher performance power supply than the SR2 and it is not supplied with a mains lead, as most customers prefer to use after market upgrade IEC mains leads with the SR3. The SR3 costs £300. The DC lead is also a separate item as several options are available for the SR3. The DC3C annealed copper DC lead costs £50 and the DC3FS annealed fine silver DC lead costs £85. The internal wiring from the regulator module to the DC output connector can be specified as fine silver for an additional £10 when the power supply is ordered or £20 plus return carriage when retro-fitted.

Because there are now more technicians available for production at PHA Ltd, both the SR2 and the SR3 are now available on a short lead time to shipping, which is currently between 5 to 15 working days.

Contact details are :-

For orders contact David Webb
e-mail sales@paulhynesaudio.com
Telephone 01953 883840

For product technical advice contact Paul Hynes
e-mail Info@paulhynesaudio.com

The business address for the new manufacturing company is

Paul Hynes Audio Ltd,
Unit 10 Linmore Court,
Threxton Road Industrial Estate,
Watton,
Norfolk,
IP25 6NG

All the best for the New Year
Regards
Paul