Originally Posted by
Barry
As a sort of
coda to this thread on B&O turntables, pickup arms and cartridges, and because Justin mentioned the MMC range of cartridges, I would like to refer Members to the following adaptors which allow these cartridges to be used in other tone arms.
The first is an adaptor which allow the cartridges to be fitted in a headshell with standard 1/2" fixings:
and the second is an adaptor allowing the MMC cartridges to be directly fitted to an arm having an EIA coupling, and which also has a sliding keyway at the bearing end of the arm for the adjustment of stylus overhang (for example all of the SME 3000 series arms, as well as the M2R-9 and M2R-12 arms):
If you'd delete that, Barry, that would be much appreciated.
There aren't enough B&O cartridges to go round for B&O turntables, so using them on no-B&O decks should be punishable by a hefty fine at least! 
Engineers: fixing problems you didn't know you had in ways you don't understand.
Reply With Quote