Senior Member
Location: West Midlands, UK
Posts: 646
I'm Lee.
Just read through all this thread and I'm going to order one of the interconnects for my Dac, probably the Gaia model, will drop them a line to see which is best for me
One thing my Dac has a ground on the back is it best to get a lead that allows me to connect to this ?
Vinyl rig 1 - NAS Spacedeck / FR64s / Lab 12 Melto / Denon SUT / Ortofon GM SPU. Vinyl rig 2 Mono Set Up - Lenco GL75 c/w Jelco 750D / AT33 Mono / EAR 834P Modded. Amplifiers - Audio Note Empress Silver / Hattor Passive Pre. Digital - Fanless Mini PC / Lampizator TRP / Linear PSU / Hummingboard Network audio adaptor. Speakers - Horns.pl Mummy's. Cables are Audio Note / Albedo / Furutech Speaker wire. Power conditioner is a Gigawatt PC2 EVO
Hi Lee, if your preamp has an earth connection then get a Yannis ConnectLitz with flying earths both ends and earth the DAC to it. Otherwise, use a separate earth wire to earth the DAC directly to mains or house earth. Watch out for any hum, which would indicate that the DAC is already earthed through its mains connection.
Senior Member
Location: West Midlands, UK
Posts: 646
I'm Lee.
Hi MartinOriginally Posted by MartinT
The amplifier does not have any earthing facility, its only the Dac. I think I will get just a straight forward interconnect without the earthing lead
Cheers
Lee
Vinyl rig 1 - NAS Spacedeck / FR64s / Lab 12 Melto / Denon SUT / Ortofon GM SPU. Vinyl rig 2 Mono Set Up - Lenco GL75 c/w Jelco 750D / AT33 Mono / EAR 834P Modded. Amplifiers - Audio Note Empress Silver / Hattor Passive Pre. Digital - Fanless Mini PC / Lampizator TRP / Linear PSU / Hummingboard Network audio adaptor. Speakers - Horns.pl Mummy's. Cables are Audio Note / Albedo / Furutech Speaker wire. Power conditioner is a Gigawatt PC2 EVO
Senior Member
Location: Surrey
Posts: 4,157
I'm Mike.
If you get one with earthing lead you can us it in other places as well.....
TAD CD / DAC / Pre, Technics 1210, MCRU PSU, Mike New Bearing & Platter, Stillpoints LP1 weight, Speedy Steve Ebony armboard, Fidelity Research FR64FX arm, Ortofon SPU. Aurorasound VIDA Phono Pre Amp, TAD Power Amp, TAD E1 speakers. Coherent RTZ 3 Grounding box, Coherent grounding cables, Creaktiv racks. Coherent Mains Cables. SR Blue Fuse. Interconnects : Coherent and Yannis 223.5 Connect Litz. Coherent speaker cable. Audio Magic Transcendence Conditioner. Coherent mains socket. Mains Filters : , PS Audio Harvesters, Russ Andrews Purifiers, Tacima, Vertex. Black Ravioli and RDC supports. Electric Beach S1NX platforms for TAD CD and Technics. Ferrite chokes everywhere except the above. Ears, brain
Mike
Yup, makes sense. You only really need the earth leads in turntable applications.
Senior Member
Location: West Midlands, UK
Posts: 646
I'm Lee.
Could this be a 'giant-killing' tonearm cable?
Well I've ordered the Gaia 222 c/w WBT 0110ag plugs, can't wait for it to come
Vinyl rig 1 - NAS Spacedeck / FR64s / Lab 12 Melto / Denon SUT / Ortofon GM SPU. Vinyl rig 2 Mono Set Up - Lenco GL75 c/w Jelco 750D / AT33 Mono / EAR 834P Modded. Amplifiers - Audio Note Empress Silver / Hattor Passive Pre. Digital - Fanless Mini PC / Lampizator TRP / Linear PSU / Hummingboard Network audio adaptor. Speakers - Horns.pl Mummy's. Cables are Audio Note / Albedo / Furutech Speaker wire. Power conditioner is a Gigawatt PC2 EVO
Senior Member
Location: West Midlands, UK
Posts: 646
I'm Lee.
Just had an email from Yannis who has informed he has posted my cable, should here all being well on monday or tuesday, fingers crossed I get it before christmas
Vinyl rig 1 - NAS Spacedeck / FR64s / Lab 12 Melto / Denon SUT / Ortofon GM SPU. Vinyl rig 2 Mono Set Up - Lenco GL75 c/w Jelco 750D / AT33 Mono / EAR 834P Modded. Amplifiers - Audio Note Empress Silver / Hattor Passive Pre. Digital - Fanless Mini PC / Lampizator TRP / Linear PSU / Hummingboard Network audio adaptor. Speakers - Horns.pl Mummy's. Cables are Audio Note / Albedo / Furutech Speaker wire. Power conditioner is a Gigawatt PC2 EVO
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,996
I'm AudioAl'sArbiterForPISHANTO.
Nice one, Lee. Hope you like it
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: Athens, Greece
Posts: 406
I'm John.
Hi Marco,
Any possible insight/idea as to how an upgraded 428 (Furutech/Eichmann or WBT) might fare against a standard 423.5?
Cheers
J.
How about an upgraded 423.5, you might prefer it?
Posting Permissions
Reply With Quote