+ Reply to Thread
Results 1 to 6 of 6

Thread: Phono stages and EQ curves.

  1. #1
    Join Date: May 2008

    Location: Londiniumsville

    Posts: 361
    I'm Robin.

    Default Phono stages and EQ curves.

    Well mine has just the RIAA setting as have many. How important are these Columbia, Decca etc settings that I see on some mega priced models? Do they really make much difference to playback quality?
    Robin. mit ARC CD9, ARC ref 5 / darTZeel power + magico v2. Clearaudio Innovation wood / Phantom ll / Lyra Atlas / Aurorasound Vida,
    Stax 009S cans.KGGG headamp. all connected with wires. Auralic Aries - Aqua La Scala. Manley Absolute. Focal Stellias. HD800S Hyland headphones - Venus

  2. #2
    Join Date: Feb 2008

    Location: Down South

    Posts: 2,411
    I'm Neal.

    Default

    How many pre-1955 records do you have and from what labels? RCA curve = RIAA curve adopted as a standard in 1955. Internet rumors suggesting the likes of Columbia persisting with their curve into the 60s and 70s are more likely wishful thinking...the EQ setting was gradually but quickly dropped from replay equipment around the same time so it would have made no sense for any of the labels not to use RIAA from 1955 onwards...
    Listening in a Foo free Zone...

    Only a Sith deals in absolutes.

  3. #3
    Join Date: Jan 2009

    Location: Norwich

    Posts: 2,810
    I'm Hugo.

    Default

    Selectable equalisation curves are not just confined to mega priced gear. The little iFi iPhono has them, also Project Phono Box RS, to name just two.

  4. #4
    Join Date: May 2008

    Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...

    Posts: 14,540
    I'm David.

    Default

    I don't think Decca fully adopted RIAA until nearer 1960, but could be wrong here..

    Since so many cartridges, even modern ones, have tone-tilt (perceived and factual) built in, does it really matter so much?
    I can't go on and I can't go back, I don't feel so matter of fact,
    I tried and tried to make good sense, What's the good to try it all again?

  5. #5
    Join Date: May 2008

    Location: Londiniumsville

    Posts: 361
    I'm Robin.

    Default

    Good, something NOT to think about.
    Robin. mit ARC CD9, ARC ref 5 / darTZeel power + magico v2. Clearaudio Innovation wood / Phantom ll / Lyra Atlas / Aurorasound Vida,
    Stax 009S cans.KGGG headamp. all connected with wires. Auralic Aries - Aqua La Scala. Manley Absolute. Focal Stellias. HD800S Hyland headphones - Venus

  6. #6
    Join Date: Jan 2009

    Location: Essex

    Posts: 38,089
    I'm openingabottleofwine.

    Default

    The RIAA equalisation standard was introduced in 1954 and was intended to be the de facto standard for all subsequent recordings.

    Initially it was not universally adopted, though it had been by the vast majority of record companies by the early '60s.

    http://www.vinylengine.com/cartridge...ualization.php might be of interest.

    If you really want something to worry about, how about the "Neumann 3.18us" correction?
    Barry

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •