+ Reply to Thread
Page 3 of 6 FirstFirst 12345 ... LastLast
Results 21 to 30 of 52

Thread: Mr Tiefenbrun has seen the light - again - apparently

  1. #21
    Join Date: Feb 2008

    Location: Boddam Aberdeenshire

    Posts: 272

    Default

    Whereas the Ekos, whilst based on the Ittock, is made in Scotland, hence the name (Ecosse = Scotland).
    "Always carry a large flagon of whisky, in case of snake bite and, furthermore, always carry a small snake."


    Kevin

  2. #22
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,501
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    The question is does "Ittock" have a 'c' in it or not?

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  3. #23
    Join Date: Feb 2008

    Location: North East UK

    Posts: 6,358
    I'm InSpace.

    Default

    Quote Originally Posted by Marco View Post
    The question is does "Ittock" have a 'c' in it or not?

    Marco.
    No!..... it's 'Ittok'.
    Shian7
    --------------------------------------------------------

    Kudakutemo
    kudakutemo

    ari mizu-no tsuki

    Though it be be broken -
    broken again - still it's there:
    the moon on the water.

    - Choshu.

  4. #24
    Join Date: Feb 2008

    Location: North East UK

    Posts: 6,358
    I'm InSpace.

    Default

    Quote Originally Posted by Prince of Darkness View Post
    Whereas the Ekos, whilst based on the Ittock, is made in Scotland, hence the name (Ecosse = Scotland).
    I could be wrong (I'm good at that) but I think the Ekos is only 'finished' in Scotland. eg. Assembled from parts manufactured in Japan. I've no idea where I heard that though.
    Shian7
    --------------------------------------------------------

    Kudakutemo
    kudakutemo

    ari mizu-no tsuki

    Though it be be broken -
    broken again - still it's there:
    the moon on the water.

    - Choshu.

  5. #25
    Join Date: Feb 2008

    Location: Boddam Aberdeenshire

    Posts: 272

    Default

    Well spotted Marco! My spelling was confused by the Ticktock nickname.
    "Always carry a large flagon of whisky, in case of snake bite and, furthermore, always carry a small snake."


    Kevin

  6. #26
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,501
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Shian7 View Post
    No!..... it's 'Ittok'.
    Exactly! But some of our resident 'numpties' seem to want to keep adding a bloody 'c'



    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  7. #27
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,501
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    You're not alone, Kevin!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  8. #28
    Join Date: Feb 2008

    Location: Boddam Aberdeenshire

    Posts: 272

    Default

    Quote Originally Posted by Shian7 View Post
    I could be wrong (I'm good at that) but I think the Ekos is only 'finished' in Scotland. eg. Assembled from parts manufactured in Japan. I've no idea where I heard that though.
    Would not surprise me. Certainly if the Ittok was made by Mamiya, as Howard states, then Linn would be unlikely to better the quality.
    "Always carry a large flagon of whisky, in case of snake bite and, furthermore, always carry a small snake."


    Kevin

  9. #29
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,501
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    So Shane was taking the piss then with the 'Mr Itto' thing?

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  10. #30
    Join Date: Feb 2008

    Location: Sunny (occasionally) Devon

    Posts: 1,758
    I'm Shane.

    Default

    No, just repeating what I thought was common knowledge when it came out. Can't find anything to substantiate the story at the moment, but it was definitely and demonstrably Japanese in origin. The giveaway is the Made In Japan legend on the back of the arm base! http://www.soundscapehifi.com/images/lp12-001-12.jpg

    As for the cartridges, I'm pretty sure the MCs were Japanese, but I don't recall who made them. IIRC the K9 was made by Audio Technica.

+ Reply to Thread
Page 3 of 6 FirstFirst 12345 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •