It's a 2.1mm DC plug, if I remember correctly.
It's a 2.1mm DC plug, if I remember correctly.
2.1mm inner pin? You can get these on fleabay in long and short versions for very little dosh. The X-10D uses the same type..
If you're ordering other bits from RS, this 2.1mm plug-n-lead is available -
2.1mm DC Adaptor Cable (294-7030)
I can't go on and I can't go back, I don't feel so matter of fact,
I tried and tried to make good sense, What's the good to try it all again?
It's a great idea to try linear if you are also going to try the passive output mod.
Website: http://www.homehifi.co.uk
Website: http://www.beresford.me
Website: http://www.homehifi.asia
Stan, did I remember correctly you saying that 15-16V 3A would be fine for the linear power supply. If so I came across these, I've not seen regulation as good as this, 0.25 mV RMS ripple! http://www.acopian.com/store/9-(7).aspx model A15MT300 (15-15.5 V 3 A). For $215 it's a bit more than your CB power supply but 0.005% regulation![]()
''You canna break the laws of Physics Jim"
Andy.
Location: London, UK
Posts: 309
... plus $25 for 230V option. Ugly as hell but if it works. One question though is if it hums at all ?
Good question. I'm trying to see if there is a UK based distributer to get hold of a sample to see what they are like. Spec's though are amazing!
''You canna break the laws of Physics Jim"
Andy.
Are you trying to crack a nut with a hammer? The Mastech HERE is almost as good and a mere fraction of the price. If I could get hold of these in the UK or they did a 240V version I would get a few.
Website: http://www.homehifi.co.uk
Website: http://www.beresford.me
Website: http://www.homehifi.asia
http://www.mastechpowersupplies.com/...y-hy1803d.html
220v/50hz for US$69.95
Frizzup