+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Interconnect suggestions please

  1. #1
    Join Date: May 2011

    Location: Torquay

    Posts: 2,719
    I'm Craig.

    Default Interconnect suggestions please

    Hi, I currently use the very well thought of Klotz MC5000 ic's, but like most folk, wonder if an improvement can be made ?
    I currently use Chord Shawline X speaker cable, I mention that as a number of people believe that using the same brand of wire throughout the system is the way to go, I personally don't.

    So, suggestions please, hopefully below £150, and I only need 0.5m.

    Thanks in advance!
    Bluesound Node 2i
    Audio Analogue Pucinni SE
    B&W DM607 s2
    Chord Shawline X speaker cable
    Klotz ic’s

  2. #2
    Join Date: Jul 2014

    Location: Hertfordshire

    Posts: 431
    I'm Graeme.

    Default

    Like many here I used to use the Klotz MC5000 but a couple of years back I replaced all my interconnects with Sommer Cable Carbocab 225.

    This cable was recommended on this site, and I can certainly confirm that it's a step up from the Klotz. Doesn't cost a fortune if you buy it off the reel and re-use the connectors from your Klotz. It is a little more fiddly to strip and solder, but not too bad.

  3. #3
    Join Date: May 2011

    Location: Torquay

    Posts: 2,719
    I'm Craig.

    Default

    Is the cable available terminated do you know?

    Or, I've seen some ready terminated called The Spirit, but not sure if they are on par with what you recommend...?
    Bluesound Node 2i
    Audio Analogue Pucinni SE
    B&W DM607 s2
    Chord Shawline X speaker cable
    Klotz ic’s

  4. #4
    Join Date: Apr 2012

    Location: N E Kent

    Posts: 51,625
    I'm Geoff.

    Default

    I have a spare 0.6m pair of Ixos 100.X03 Studio interconnects with locking WBT phono/RCA plugs, in manufacturers pouch . These sound mighty fine . Happy to sell for £55 (PayPal) including UK postage on a 'sale or return' basis. They won't be sent back, they sound great! I bought them new, cost around £150 as I recall.

    It is impossible for anything digital to sound analogue, because it isn't analogue!

  5. #5
    Join Date: May 2011

    Location: Torquay

    Posts: 2,719
    I'm Craig.

    Default

    Is the cable available terminated do you know?
    Bluesound Node 2i
    Audio Analogue Pucinni SE
    B&W DM607 s2
    Chord Shawline X speaker cable
    Klotz ic’s

  6. #6
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 6,564
    I'm Kevin.

    Default

    Personally, I would look for an OCC copper cable, with decent plugs.
    A secondhand "Spitfire" would do the job nicely, and is a big step up from the Carbocab.
    Last edited by CageyH; 28-09-2023 at 15:44.
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  7. #7
    Join Date: Nov 2014

    Location: Birmingham

    Posts: 142
    I'm Michael.

    Default

    Stay with Klotz, but move to AC110.

    Mike.

  8. #8
    Join Date: Apr 2009

    Location: Near Saffron Walden, Essex

    Posts: 7,091
    I'm Dave.

    Default

    Atlas make a range of truly excellent cables using high quality copper and well thought out geometry.

  9. #9
    Join Date: Oct 2009

    Location: Birmingham, UK

    Posts: 394
    I'm Phil.

    Default

    Buy cable with ptfe or teflon insulation , dont melt when soldering , ipl accoustics £11 a metre , Neotec is fairly well priced also nemoi 5220 fairly cheap and sounds great ,ive got rfc venus cables and its close in sound quality , tried the occ version of this cable and its not so good and cardas cable individualy insulated
    hifi collective . teflon and ptfe is usually a good indicator of quality . phil.
    Last edited by oceanobsession; 09-10-2023 at 09:17.
    Phil.

  10. #10
    Join Date: May 2011

    Location: Torquay

    Posts: 2,719
    I'm Craig.

    Default

    Quote Originally Posted by mbic View Post
    Stay with Klotz, but move to AC110.

    Mike.
    Why?
    Bluesound Node 2i
    Audio Analogue Pucinni SE
    B&W DM607 s2
    Chord Shawline X speaker cable
    Klotz ic’s

+ Reply to Thread
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •