+ Reply to Thread
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 46

Thread: Bigbottle Audio BB3 valve rolling

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 6,731
    I'm Kevin.

    Default Bigbottle Audio BB3 valve rolling

    I know a few people on here own one, so I am interested to know what you have tried, and what works best for you?
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  2. #2
    Join Date: Aug 2020

    Location: Lincolnshire

    Posts: 47
    I'm Zander.

    Default

    1 - RT ECC83 and 2x Siemens PCC88

    2 - TFK83 & 2x Tungsram PCC88

    3 - TFK & TFK

  3. #3
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 6,731
    I'm Kevin.

    Default

    1 is what I currently have fitted, except it is a 12AX7S
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  4. #4
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 6,731
    I'm Kevin.

    Default

    I am trying the 2nd combination now.
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  5. #5
    Join Date: Jan 2013

    Location: Birmingham

    Posts: 7,019
    I'm James.

    Default

    Have you ever compared your BB3 with the Kin phono stage Kev? I wandered if there were any similarities as Alan designed both? Or it maybe closer to the Vivant?
    Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702

    Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2

  6. #6
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 6,731
    I'm Kevin.

    Default

    My Kin is not far from a Vivant.
    The BB3 is the one I prefer.
    I do sometimes switch my SS pre for the Kin, when I fancy a change.
    I am also tempted to add a 2nd TT, so I would plumb the Kin back in the system if I did that so that I would not have to switch cables.
    I think Alan has learnt more along the way when designing his phono stages. Each one seems better, which is why I don’t want to hear a BBU.
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  7. #7
    Join Date: Jan 2013

    Location: Birmingham

    Posts: 7,019
    I'm James.

    Default

    Quote Originally Posted by CageyH View Post
    My Kin is not far from a Vivant.
    The BB3 is the one I prefer.
    I do sometimes switch my SS pre for the Kin, when I fancy a change.
    I am also tempted to add a 2nd TT, so I would plumb the Kin back in the system if I did that so that I would not have to switch cables.
    I think Alan has learnt more along the way when designing his phono stages. Each one seems better, which is why I don’t want to hear a BBU.
    More Jfets?.

    The BB3 hybrid phono really relies on the JFets in order to operate with MC as valves would be too noisy. So not really sure if your really hearing the Fets or the tubes?

    I am actually thinking of going all SS for an alternative Phono stage which I think may happen very soon - I will keep you posted Obviously I will still use a tube preamp although again I think a buffered SS preamp could be on the cards some day. Definitely would not bother with a passive preamp.

    I would really like to hear the differences between a SS vs Tube vs SS/tube phono and a SS passive vs SS buffered vs tube preamp and combinations of each of them to ascertain which sounds the best and to know where tubes really shine.

    Following on from this I can only say in my opinion having an all tube phono and preamp the tubes in the phono make a huge difference but the tubes in the regulation stage less so. So a tube phono and SS preamp maybe the way to go? I don't know until I try.
    Main system : VPI Scout 1.1 / JMW 9T / 2M Black / Croft 25R+ / Croft 7 / Heco Celan GT 702

    Second System : Goldring Lenco GL75 / AT95EX / Pioneer SX590 / Spendor SP2

  8. #8
    Join Date: Aug 2020

    Location: Lincolnshire

    Posts: 47
    I'm Zander.

    Default

    Quote Originally Posted by Jimbo View Post
    More Jfets?.

    The BB3 hybrid phono really relies on the JFets in order to operate with MC as valves would be too noisy. So not really sure if your really hearing the Fets or the tubes?

    I am actually thinking of going all SS for an alternative Phono stage which I think may happen very soon - I will keep you posted Obviously I will still use a tube preamp although again I think a buffered SS preamp could be on the cards some day. Definitely would not bother with a passive preamp.

    I would really like to hear the differences between a SS vs Tube vs SS/tube phono and a SS passive vs SS buffered vs tube preamp and combinations of each of them to ascertain which sounds the best and to know where tubes really shine.

    Following on from this I can only say in my opinion having an all tube phono and preamp the tubes in the phono make a huge difference but the tubes in the regulation stage less so. So a tube phono and SS preamp maybe the way to go? I don't know until I try.
    Contact Oliver @Bigbottle. He had a buffer SS preamplifier and a SS phonostage and has Valve equipment too. He let me take my equipment over and listen to it and a Bigbottle 3. He was also very helpful when i bought a used Bigbottle 3. He is not far away from Birmingham.

  9. #9
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 6,731
    I'm Kevin.

    Default

    This morning, I started with the TFK ECC83 and Tungsram PCC88. Very nice.
    I swapped the TFK ECC83 for a Tungsram ECC83 foil getter, and I much preferred this.
    I now how a 50s Tesla ECC83 foil getter with Tesla “32” PCC88 and I am very happy with this. Is it better than the Tungsram valve compliment?

    I can’t remember!
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  10. #10
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 6,731
    I'm Kevin.

    Default

    The sound with different valves is different, and I am currently using my modified AT95SA, so I am not sure if the JFETs are involved?
    I have some very good SS phono stages available if I want to try one, with a choice of two upgraded linear power supplies.
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

+ Reply to Thread
Page 1 of 5 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •