+ Reply to Thread
Results 1 to 6 of 6

Thread: Hana ML advice.

  1. #1
    Join Date: Aug 2012

    Location: North East

    Posts: 3,423
    I'm Roger.

    Default Hana ML advice.

    I am just wondering if there are any fellow Hana ML users here who could perhaps give me a little advice? I am just wondering what the optimum impedance settings and gain settings are best with this cartridge. Any tips welcome.

  2. #2
    Join Date: Oct 2012

    Location: The Black Country

    Posts: 5,850
    I'm Alan.

    Default

    Hi Steve, looking at the specs I would say 100 ohm load to start, you could try more afterwards.

    Output is 0.4mV so you need a gain setting of 60dB or a bit more. What is you phono stage?
    I love Hendrix for so many reasons. He was so much more than just a blues guitarist - he played damn well any kind of guitar he wanted. In fact I'm not sure if he even played the guitar - he played music. - Stevie Ray Vaughan

  3. #3
    Join Date: Mar 2014

    Location: KY - Scotland

    Posts: 5,147
    I'm Mike.

    Default

    ML needs 100 + if I remember right

  4. #4
    Join Date: Aug 2012

    Location: North East

    Posts: 3,423
    I'm Roger.

    Default

    Quote Originally Posted by Firebottle View Post
    Hi Steve, looking at the specs I would say 100 ohm load to start, you could try more afterwards.

    Output is 0.4mV so you need a gain setting of 60dB or a bit more. What is you phono stage?
    Cheers Alan. I am using an NJC Reference phono stage at the moment.

  5. #5
    Join Date: Oct 2020

    Location: West Sussex

    Posts: 17
    I'm Ian.

    Default Hana ML

    I have my ML set at 100 ohms and 70db on my Trichord Diablo and i have to say it sounds alright

  6. #6
    Join Date: Sep 2012

    Location: Dunblane

    Posts: 520
    I'm Steve.

    Default

    Hi Roger
    I run mine on my Rega P8 through a Cyrus Signature phono amp at 60db and 330ohms.
    Regards Steve

    Funkfirm Little Super Deck with F5 arm
    Audio Technica AT33sa
    Vertere Phono 1
    Naim Supernait 2
    Niam Allae speaker

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •