Yep love ‘em. Have a copy of a Wilson Benesch unipivot but made from rosewood that I am not using right now. Have made two other unipivots, one I made from an oak drumstick I cut in half and routed a groove for the cable. Glued together and made the rest from brass, the other I turned on the lathe from rosewood. Very good results from them both. The pivots I made from a steel spike pivoting on a watch/clock jewel. I now use a stax UA-70 that is a kind of unipivot that I cannot describe as I wouldn’t dare to take it apart to find out
Bakoon 13r Denon DP80 Stax UA-70 Shure Ultra 500 in a Martin Bastin body with jico stylus, project ds2 digital Rullit aero 8 field coils in tqwt speakers
Office system, DIY CSS fullrange speakers with aurum cantus G2 ribbons yulong dac Sony STR6055 receiver Jvc QL-A51 direct drive turntable, Leema sub. JVC Z4S cart is in the house
Garage system another Sony receiver, cassette deck
System components are subject to change without warning and at the discretion of the owner.