Hi Guys
I’m looking for a recommendation for someone who produces PCB.s I only need one so looking for reasonable cost.
Thanks in advance for your help.
All have a good day.
Regards
William
Location: Alford Lincolnshire
Posts: 84
I'm William.
Hi Guys
I’m looking for a recommendation for someone who produces PCB.s I only need one so looking for reasonable cost.
Thanks in advance for your help.
All have a good day.
Regards
William
I use Eurocircuits, they accept files from Eagle and KiCad and plain Gerber files.
Good quality as well.
https://www.eurocircuits.com/
Location: Pacific NorthWest
Posts: 110
I'm Jeremy.
Do you need design work or just someone that prints?
Location: Alford Lincolnshire
Posts: 84
I'm William.
Hi Folsom
I just need someone to print it’s in a Gerber/ Excellon file format.
Thanks
William
Location: North Island New Zealand
Posts: 1,757
I'm Chris.
Hi William
Easy EDA is highly recommended https://easyeda.com/
It is complete, from designing your pcb with a very easy interface that takes you through schematic placement then board design , generating a gerber file, and ordering your pcb
on a scale of the best, it gets 10/10
Unlike other programs ( IMO clunky dreadful interfaces ) that insist on you using certain unhealthy proprietary software, ( Kicad although as a unburdened file - never the less is clunky and just hard work ) easy EDA
in comparison runs in your internet browser, you can choose to keep your file private or indeed publish it if you are inclined.
Hope that helps
Location: Pacific NorthWest
Posts: 110
I'm Jeremy.
Location: Liverpool
Posts: 766
I'm Sandro.
PCB GOGO from China DSCF2631[1].jpg
Endless options and not expensive and turn around is really quick
I just had 10 U PCB made
Yes that is not a tipo 10 U in cooper weight
Location: Alford Lincolnshire
Posts: 84
I'm William.
Hi Guys
Thanks for the replies. I will do some further investigation.
Regards
William