+ Reply to Thread
Page 35 of 81 FirstFirst ... 25333435363745 ... LastLast
Results 341 to 350 of 810

Thread: The Marco-boy main system, as of August 2020

  1. #341
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 37,883
    I'm Martin.

    Default

    I was talking about miniatures like the LS3/5a, KEF LS50, Harbeth P3 ESR, not larger standmounts like the Ditton 15. They're a decent size, big enough to avoid some of the unacceptable compromises.

    They do have 90dB sensitivity, probably an easy load for the amp too.

    Given how cheap you can buy decent old speakers these days I'd have gone for a three-way speaker for the telly myself. In fact I did, although they cost a bit more than your Celestions:


    www what is my screen resolution com

    Just about large enough where the size itself isn't a serious compromise.
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > JM Labs Focal Electra 926.

  2. #342
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Some more pics, as the light is much better today:









    I've removed the silver plastic surrounds from the grilles, as I didn't really like them (easily put back on though if need be), plus the cabinets themselves have been polished a bit more! Looking good, I think

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  3. #343
    Join Date: Apr 2017

    Location: Manningtree, Essex

    Posts: 1,722
    I'm Tony.

    Default

    Quote Originally Posted by Marco View Post
    Some more pics, as the light is much better today:









    I've removed the silver plastic surrounds from the grilles, as I didn't really like them (easily put back on though if need be), plus they've been polished a bit more! Looking good, I think

    Marco.
    They look good. My kind of speaker design to be honest. I prefer straight forward ‘classic’ enclosures which don’t draw unnecessary attention but ooze class. I hate looking at drivers, I do appreciate them but prefer them working behind the scenes.


    Sent from my iPhone using Tapatalk
    A mainly digital setup with a musical amplifier and endearing 1970's speakers. A CD player that hardly ever gets used and a turntable that is good enough to remind my how enjoyable my old vinyl is. Some cables and things.

  4. #344
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Macca View Post
    I was talking about miniatures like the LS3/5a, KEF LS50, Harbeth P3 ESR, not larger standmounts like the Ditton 15. They're a decent size, big enough to avoid some of the unacceptable compromises.

    They do have 90dB sensitivity, probably an easy load for the amp too.

    Given how cheap you can buy decent old speakers these days I'd have gone for a three-way speaker for the telly myself. In fact I did, although they cost a bit more than your Celestions:


    www what is my screen resolution com

    Just about large enough where the size itself isn't a serious compromise.
    Yeah, sure, but remember I'm using them with subs (for TV and movie duties, otherwise just as a stereo pair), and there's no lack of detail to the midrange, even in the absence of a dedicated driver, quite the opposite...

    Plus, if you count the ABRs as 'drivers' (and regardless they DO contribute significantly to the overall sound), then to all intents and purposes, the Ditton 15s are a '3-way' design

    And yes, the 90db efficiency certainly gives the amp an easy load (150W into the fronts), which really works well in this application, effortlessly filling the room with a punchy 'big-boned' sound!

    Marco.

    P.S I like those speaks you've got, what are they?
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  5. #345
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by mightymonoped View Post
    They look good. My kind of speaker design to be honest. I prefer straight forward ‘classic’ enclosures which don’t draw unnecessary attention but ooze class. I hate looking at drivers, I do appreciate them but prefer them working behind the scenes.
    Cheers, Tony. I was going to have the cabs French polished, just to get them looking mint [which is what I like with vintage gear, as I'm not into tatty-looking old tat, no matter HOW good it sounds], but dunno now if they need it. It would certainly save me the £240 I was quoted!

    Yes, I know what you mean about grilles, and as long as they've been well-designed (and integral to the sound) I tend to agree, which applies to these Celestions. With the grilles on, the sound (and in particular stereo image) is definitely better defined/balanced and more natural, plus I dig the '60s retro-chic grille cloth'!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  6. #346
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 37,883
    I'm Martin.

    Default

    Beovox MC120.2

    Don't know if you have done this already but if your amp allows it, cut off the signal to the mains speakers about 50, 60 Hz or so, so only the sub is handling the lower stuff.

    The problem with a two way dome and cone is the main driver having to do both bass and midrange, so the more bass duties you can shift to the sub, the better.
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > JM Labs Focal Electra 926.

  7. #347
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Nice... Yes, I've done that (70Hz works best here), and yes that defo improves matters

    It's laughable how good this little system sounds, given that in total it's cost less than £2k - and that includes the TV!

    All I want now is a minty pair of Ditton 11s, to use as surrounds.

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  8. #348
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 37,883
    I'm Martin.

    Default

    Excellent - so you've effectively turned it into a 3 way speaker system. Are you using two subs or just one?
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > JM Labs Focal Electra 926.

  9. #349
    Join Date: Apr 2010

    Location: Bristol, since 1978. Current house since 1996!

    Posts: 910
    I'm Chris.

    Default

    It's interesting how having a Flatsreen adjacent to speakers affects the sound. My Kuro is nearest to the Left speaker and affects the volume somewhat, so I have to sit off-centre to adjust for imagery.
    Attached Images Attached Images
    Chris.

  10. #350
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Macca View Post
    Excellent - so you've effectively turned it into a 3 way speaker system. Are you using two subs or just one?
    Two 10-inch subs, dude

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


+ Reply to Thread
Page 35 of 81 FirstFirst ... 25333435363745 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •