Hi all, just done my intro's.A few weeks ago I picked up for a song a pair of Cerwin Vega vs120 cabinets in as new condition. They're fitted with a mckenzie 12" full range speaker which I can't find any info or images of on the net, but a mid range and tweeter have never been fitted. I need a 4" mid range and 1" tweeter, holes are 4" and 2". Found an audax 4" midrange on fleabay yesterday for a tenner so bought it hoping to find another later. Then later saw some Mordaunt Short speakers with no info for £10. Told they were ms10's and I have a pair so checked and they're fitted with audax 4" and 1" tweeters and crossover. Got them for £16 so my intention is to fit the MS speakers into the mid range and tweeter holes and bi-amp them from a denon avr 2307 (which I've already done with a pair of Lynn helix), so one set of leads going to the McKenzies (12 ohm) and the other leads going to the mid and tweeters (8ohm). I can't see why this isn't feasible but would be grateful for comments. The McKenzies at the moment in the Vegas are bassy but very warm and light on the highs.