Wanted pair of 20mm slow blow 6.3 amp fuses, would consider 5 amp.

[Discopants]

Im after a pair of 20mm T6.3A fuses but would consider T5A.

I would ideally like Synergistic research black or blue but open to others as long as I can match.


Sent from my iPad using Tapatalk

[Beobloke]

Sorry, but fuse values aren’t really open to random change or “would consider”. If you need 6.3A, you need 6.3A.

[Discopants]

Please don’t turn my wtd thread into any sort of fuse debate or educational public broadcast.

Thank you


Sent from my iPad using Tapatalk

[Beobloke]

My apologies for attempting to introduce the concept of basic electrical safety rules into your thread.

Please forgive me. As you were...

[sailor]

Hi Martin,

I sent you a PM to avoid posts like the one above

[Patrick Dixon]

You can avoid common sense if you like (many seem to these days) but Adam is absolutely correct.

[Discopants]

You can avoid common sense if you like (many seem to these days) but Adam is absolutely correct.

Adam has no idea how I intend to use these fuses as I’ve not offered any information to that effect.

This is a wanted advert , I’m not asking for fuse advice , safety efficacy or otherwise.

I’ve asked nicely to refrain from derailing my wanted advert, please don’t make me trouble the moderators.


Sent from my iPad using Tapatalk

[Barry]

There would be a safety issue if a higher rated fuse was being considered, but it's not - Discopants is considering fitting a lower current rated fuse, so if anything, the 5A fuse may blow more often.

[mad-moon]

There would be a safety issue if a higher rated fuse was being considered, but it's not - Discopants is considering fitting a lower current rated fuse, so if anything, the 5A fuse may blow more often.

Good post Barry......Only reply to the post if you have something suitable for Martin....The thread is a mess...I hope something suitable turns up Martin...

[Discopants]

Bump , if anyone has a single SR blue T6.3A that could work too.


Sent from my iPad using Tapatalk