+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: LP12 Troubles

  1. #1
    Join Date: Jul 2019

    Location: Worcester Enland

    Posts: 8
    I'm Terry.

    Default LP12 Troubles

    Hello. I have finally finished a total revamp of my system which now includes Tannoy Arden speakers, Radford STA amp, Audiolab 8000C pre, Linn Selekt renderer, Stax SR L700 headphones. To my ancient ears it sounds wonderful but the cherry on the cake was to be the return of my ill LP12. I have purchased most of my new equipment from a single dealer who is Linn approved. Several months ago the LP12 just stopped working. I took it to the dealer who said the power supply board was fried and the motor was dead. I paid £623 to get the LP12 repaired and serviced which the dealer said he did personally. Yesterday the dealer came over to return mended LP12 and do the room optimisation for the Linn Selekt. When he came to set up the LP12 I had to point out that the turntable needed levelling and had to find a spirit level – it needed considerable adjustment. Next problem was that the turntable took an age to get to speed and the dealer said that he had forgotten to actually replace the motor so would have to come back. We got the turntable up to speed and although Moondance sounded good, there was no real volume even with the pre turned fully up. I had no problems with my previous Naim NAC62/NAP90 setup but dealer said this was due to a different phono setup on the Naim (?). The LP12 currently has an Akito arm with a Corus Blue cartridge and the dealer has said that a Goldring 1042 would work well. Because my brain is a moving magnet with one magnet missing, I did not really take any of this up with the dealer yesterday but I am now feeling really unsettled and stuck. What I would like advice on is whether I should just accept the suggestion and buy a new cartridge or whether there are other avenues to explore. I am not very technically minded so am in the hands of people who are. I am not sure I have much confidence left with my dealer but as I said before, I feel stuck. Many thanks

  2. #2
    Join Date: May 2010

    Location: Worcestershire, UK

    Posts: 886
    I'm Rob.

    Default

    Sorry if this is a "sucking eggs" suggestion but: First thing I'd check is that the phono lead from the turntable is actually connected into phono in and not another input of your pre-amp (eg. CD or Aux).
    Rob.
    Powered by crossed fingers and clenched buttocks

  3. #3
    Join Date: Jul 2009

    Location: Hampshire, UK

    Posts: 2,901
    I'm Buriedunderaloadofturntables.

    Default

    As above - first check the LP12 is plugged into the right input. You shouldn’t need a new cartridge unless something monumentally catastrophic has happened to it but I’ve never known this to happen!
    Adam.

  4. #4
    Join Date: Mar 2016

    Location: Barnet, london UK

    Posts: 1,839
    I'm Adam.

    Default

    Apologies, I may have misinterpreted this...
    Did you say you paid £623 for a service and new power board and motor, then the dealer after struggling to get the deck to speed, admitted he 'forgot' to replace the motor?

    obviously this does not sound right!
    "lack of passion is fatal"


    Vinyl: Thorens TD-124mk2 / SME-312 Aluminium 'special' / SME M2-9R / STEREO: Etsuro Urushi Cobalt / Shure M3D / Ortofon SPU A95 / Cartridge Man Music Master / Shure - SC35C (US) / SAEC C3 MC MONO: Miyajima Zero B 0.7mil mono / Miyajima Premium 1.0 / Amps & SUTs: Radford STA25 mk3 / AD Audio 'Satchmo2' pre & LCR phono / Hashimoto HM-7 SUT / ETR-MONO SUT Digital: SW1X Audio Design DAC 1 signature / Roon / Tidal Speakers: Tannoy 12" MGs' in RFC custom 'Rutland' Cabinets with RFC crossovers / Tannoy ST-100 Super Tweeters Cables: LFD Grainless phono / RFC Mercury / Duelund DCA16GA tinned copper / Kimber 12TC / SW1X Audio Design USB-SPdif / Duelund DCA20GA interconnects / SW1X Audio SPDIF Aero 6 / Mains Power Conditioner / Box Furniture rack / Audiodesk Systeme Vinyl Cleaner / a very beautiful & understanding Wife!

  5. #5
    Join Date: Oct 2012

    Location: The Black Country

    Posts: 5,252
    I'm Alan.

    Default

    PM sent.

  6. #6
    Join Date: Aug 2016

    Location: Kent UK

    Posts: 167
    I'm Paul.

    Default

    Sounds like you need to finds a new dealer and get your money back from the man in the big hat and chaps who is clearly not up to the job of repairing your LP12

    Paul
    Current setup Thorens TD-160 Mk1 with Denon DL-110 MC Cartridge, Pioneer A-70 Amp, Pioneer PD-7700 CD Player, Yamaha AX-592 Amp, Yamaha CDX-810 CD Player, Yamaha KX-480 Cassette Deck, Yamaha TX-492RDS Tuner, Monitor Audio Bronze 5 speakers, Van-Damme Cables throughout.

  7. #7
    Join Date: Jun 2015

    Location: London/Durham

    Posts: 3,664
    I'm Lawrence.

    Default

    +1, did you pay by card? Also I wonder if a call to Linn to discuss how they approve their dealers is on the cards (once this is sorted, no point in winding him up further yet).

  8. #8
    Join Date: Jul 2019

    Location: Worcester Enland

    Posts: 8
    I'm Terry.

    Default

    Many thanks for comments. I assumed the dealer knew which were the correct connections but now more worried! I am a bit stuck given my turntable is with the dealer so I suppose I am committed to a new cartridge. I will ask for the old one back plus the old motor. He said he could not give me the old power supply board back as it was dangerous so he binned it. When this is sorted I will follow up the contact with Linn. Thanks

  9. #9
    Join Date: Apr 2009

    Location: Near Saffron Walden, Essex

    Posts: 6,690
    I'm Dave.

    Default

    Not all Linn dealers are turntable specialists. Some are up to date with the latest electronics but have no clue about the LP playing side of things.

    The old Valhalla board had a couple of things which were very common faults. As Linn stockists we used to have a bag of parts to replace on the PCB - a 10 minute job when you knew how. Maybe that is why the board wasn't returned to you ?

    As to motors, I have never seen a faulty one - noisy yes, but running slow or not at all, I have not experienced. In this case you were informed that the motor was 'dead', so how come it worked, albeit slowly, when the turntable was returned from repair without a new motor ?

    Isn't the Corus Blue a Goldring in drag ?

  10. #10
    Join Date: Dec 2017

    Location: Lincolnshire

    Posts: 244
    I'm Martin.

    Default

    I’d have to agree with folk as it sounds like you’ve not paid for much more than a tickle of your own parts plus now a new cartridge on top due to him not plugging it in correctly. With the new cartridge and using the phono input I am guessing you’ll get a knowing “there you go......”.

    Unfortunately......

+ Reply to Thread
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •