+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Croft micro playing up

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date: Mar 2016

    Location: Brighton, UK.

    Posts: 3,100
    I'm Mike.

    Default Croft micro playing up

    Just plugged the Croft micro back in after using a JVC ax z 1010 for a few months, and its not working, sound is distorted, using it with a 909, replaced the croft pre with a cheapy passive and that works, so fault is defo in the Croft.
    Current system 1210 GR. CDP - Meridian G08. Amp -Sugden A21I - Sig. Wharfedale Lintons.

  2. #2
    Join Date: Apr 2009

    Location: Near Saffron Walden, Essex

    Posts: 7,090
    I'm Dave.

    Default

    Check the fuse, if not it's a valve.

  3. #3
    Join Date: Jun 2015

    Location: London/Durham

    Posts: 6,881
    I'm Lawrence.

    Default

    Quote Originally Posted by hifi_dave View Post
    Check the fuse, if not it's a valve.
    Agree about the valve, not sure how a blown fuse would make it distort though?

  4. #4
    Join Date: Apr 2009

    Location: Near Saffron Walden, Essex

    Posts: 7,090
    I'm Dave.

    Default

    I believe there is one for + and one for -.

  5. #5
    Join Date: Mar 2016

    Location: Brighton, UK.

    Posts: 3,100
    I'm Mike.

    Default

    Quote Originally Posted by hifi_dave View Post
    I believe there is one for + and one for -.
    Thanks Dave, which fuse do I check? And how can I tell which valve is playing up?
    Current system 1210 GR. CDP - Meridian G08. Amp -Sugden A21I - Sig. Wharfedale Lintons.

  6. #6
    Join Date: Feb 2012

    Location: Estonia

    Posts: 145
    I'm ahto.

    Default

    it's mostly been the fuses in my experience. a blown fuse means heavy distortion.

    they're at the back.

    QUOTE=Mikeandvan;1153389]Thanks Dave, which fuse do I check? And how can I tell which valve is playing up?[/QUOTE]
    Lenco L75 in a very heavy plinth /Hadcock 228 /London Decca Blue /Croft SMA IV Octal with separate 2020 PSU/ Croft 7R monos /Harbeth SHL5

    Fletcher .3 /Hadcock 228 / Denon 103R/ Croft HeadAmp /Croft Mega Micro II (2015) /Croft Series 5 MkIi /Markaudio SOTA Cesti B

    Leak Troughline III GTA / Vecteur D-2.2 / Wadia 121 / Katana, Isolator & RPi /RFC & AntiCable

  7. #7
    Join Date: Mar 2016

    Location: Brighton, UK.

    Posts: 3,100
    I'm Mike.

    Default

    Quote Originally Posted by eksiil View Post
    it's mostly been the fuses in my experience. a blown fuse means heavy distortion.

    they're at the back.

    QUOTE=Mikeandvan;1153389]Thanks Dave, which fuse do I check? And how can I tell which valve is playing up?
    [/QUOTE]

    There's only 1 fuse at the back, appears fine.
    Current system 1210 GR. CDP - Meridian G08. Amp -Sugden A21I - Sig. Wharfedale Lintons.

  8. #8
    Join Date: Jun 2015

    Location: London/Durham

    Posts: 6,881
    I'm Lawrence.

    Default

    Quote Originally Posted by hifi_dave View Post
    I believe there is one for + and one for -.
    Oh right makes sense now, I assumed it was just on the mains power.

  9. #9
    Audio Al is offline Pishanto Specialist & Super-Daftee
    Join Date: May 2012

    Location: Dagenham Essex

    Posts: 11,215
    I'm Allen.

    Default

    Depending on age send it off to Glen for a dose of looking at
    [

  10. #10
    Join Date: Feb 2016

    Location: London

    Posts: 882
    I'm Don.

    Default

    Quote Originally Posted by Audio Al View Post
    Depending on age send it off to Glen for a dose of looking at
    +1
    Difficult one, best send to Glenn...before you know it you'll have it back sorted.....and singing! I must admit, he is soooo reasonably priced ....

    Sent from my ONE A2003 using Tapatalk

+ Reply to Thread
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •