+ Reply to Thread
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 31

Thread: Wrexham Christmas village

  1. #11
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by hifinutt View Post
    Lovely pics marko , we are not allowed lights in our local shopping area , nor christmas trees or anything like that . Like many areas in the middle east
    Is that what they call the West Mids now then, Phil?

    Otherwise, thanks!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  2. #12
    Join Date: Sep 2009

    Location: west mids, UK

    Posts: 3,268
    I'm Phil.

    Default

    fortunately only a small part of it !!

    ou might slip, you might slide, you might
    Stumble and fall by the road side
    But don't you ever let nobody drag your spirit down
    Remember you're walking up to heaven

    Don't let nobody turn you around
    … Walk with the rich, walk with the poor
    Learn from everyone, that's what life is for
    And don't you let nobody drag your spirit down

    Eric Bibb

  3. #13
    Join Date: Feb 2020

    Location: wrexham

    Posts: 25
    I'm Andrew.

    Default

    I'm really sorry Marco - missed your reply completely!
    I live between the cemetery and the Brickie!

    I bought some kit from Acton Gate years ago but as you can see my kit is a little downmarket for Acton Gate!
    It's Fleabay, Gumtree and Facebook for me haha.

  4. #14
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    No problem, Andy

    Ah yes, I know where you are. Acton Gate Audio is one of the last 'proper' family-run hi-fi shops in the UK. I've been going there since the 90s. They sell all sorts of stuff.

    Worry not, we specialise in making great sounds out of 'cheap tat', lol!

    No honestly, we're big here on showing folks how to get the highest 'sound-per-pound' from their systems, so aside from advice you receive on the forum, if there's anything I can ever do to help with your system, just pop me a PM. I have a fair bit of experience in know how to get the most out of systems, on a budget.

    Anyway, hope you hang around and become a regular contributor. Enjoy!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  5. #15
    Join Date: Jan 2020

    Location: South Yorkshire

    Posts: 2,683
    I'm Andre.

    Default

    Whats wrexham like for shopping, i didnt think their was anything there?

  6. #16
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    It's pretty good. See here: http://www.eagles-meadow.co.uk/ There's also another smaller shopping centre, and quite a few interesting places in the town centre, although like a lot are now, it's a little rundown compared with how it used to be, as shops close due to folks doing most of their shopping at the centres or online.

    There's a proper old-fashioned record shop, too: https://www.google.com/maps/uv?hl=en...oiowCnoECA8QBg



    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  7. #17
    Join Date: Jan 2020

    Location: South Yorkshire

    Posts: 2,683
    I'm Andre.

    Default

    How far are you from Portmerion then?

  8. #18
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    About an hour and a half's drive. We were there last year. Yeah, I know you liked The Prisoner

    I'm more interested in the architecture and beautiful views

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  9. #19
    Join Date: Feb 2020

    Location: wrexham

    Posts: 25
    I'm Andrew.

    Default

    Thanks Marco. that's very kind of you!

    Quote Originally Posted by Marco View Post
    No problem, Andy

    Ah yes, I know where you are. Acton Gate Audio is one of the last 'proper' family-run hi-fi shops in the UK. I've been going there since the 90s. They sell all sorts of stuff.

    Worry not, we specialise in making great sounds out of 'cheap tat', lol!

    No honestly, we're big here on showing folks how to get the highest 'sound-per-pound' from their systems, so aside from advice you receive on the forum, if there's anything I can ever do to help with your system, just pop me a PM. I have a fair bit of experience in know how to get the most out of systems, on a budget.

    Anyway, hope you hang around and become a regular contributor. Enjoy!

    Marco.

  10. #20
    Join Date: Jan 2020

    Location: South Yorkshire

    Posts: 2,683
    I'm Andre.

    Default

    Quote Originally Posted by Marco View Post
    About an hour and a half's drive. We were there last year. Yeah, I know you liked The Prisoner

    I'm more interested in the architecture and beautiful views

    Marco.
    It was a bit run down last time i went. Clough william Ellis even did Peter Stubbs works down the road from us but was knocked down in the late 60's

+ Reply to Thread
Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •