+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: FS: Mesmerize DCB1 Boards *2 , Salas Mesmorize Type Input Selector Module * 1

  1. #1
    Join Date: Jan 2014

    Location: london se6

    Posts: 823
    I'm AndyElectroNumpty.

    Default FS: Mesmerize DCB1 Boards *2 , Salas Mesmorize Type Input Selector Module * 1

    Hi All

    Clearing out my tool box and have decided to sell on the following to whoever wants them,


    1) 2 DIY Audio "Ten Years After" Special reissue Mezmerize DCB1 boards



    These will build a DCB1 which has relay input selectors, plenty of info in these amps out there and they produce a great sound .

    These are mint - still sealed and unused to use Vinyl parlance

    Description from the DIY Audio site

    https://diyaudiostore.com/collection...rize-b1-buffer

    The Mezmerize is a direct coupled preamp (no coupling caps) based on Nelson Pass's B1 Buffer. It boasts symmetrical Salas shunt voltage regulators that use LED strings for very accurate voltage reference. Included in the board are provisions for up to 6 relays for input signal switching and an output relay for delayed start-up muting. Being based on the B1 Buffer, Voltage Gain should be close to 1.

    "Ten Years After" Special reissue

    The new PCB bring some improvements over the original:
    The mounting distances are now compatible with the Hifi2000 perforated chassis baseplates that the diyAudio store carries
    The five LEDS +/- voltage reference chains in the PSUs now work with equal current bias as in the vintage Hypnotize hot-rod version


    *Note*

    To Build these you will need a matched quad of LSK170 ±0.1mAs - Matched Quad (Grade B)

    These are currently available from DIY Audio but they have limited stocks, they are not too expensive but hard to get once gone as the original Toshibas are no longer made. See link

    https://diyaudiostore.com/collection...-matched-jfets

    Also - they are optimised for hot rodding to 200 MA as I understand it but this will sound pretty good! If you want more then you'll need different boards.

    Build thread here -

    https://www.diyaudio.com/forums/pass...ml#post1854512

    These are quality boards , not Chinese copies that you get on eBay etc.

    Given import costs of VAT, Duty and postage I will sell these for £30 inc UK postage. I'm still losing out on the original purchase.

    Paypal gift or you can pick up in Catford SE London, I also work in Croydon or Canary Wharf if this is easier for you and will knock off £3 for the postage saved .



    2) I have 1 spare Salas Mesmorize Type Input Selector Module




    This is basically the relay selection module of the Mezmerize boards without the DCB1 bit. You can use this as a selector for any pre amp or build as a stand alone passive if you wish.

    Info thread here -

    https://www.diyaudio.com/forums/grou...ml#post4716031


    Again this is a quality board, unused and has a spot for an Alps pot or you can wire up something better if you want.

    Will sell for £20 inc UK postage, again will knock off £3 if you collect.


    pics to follow!

    Forgot to add they both allow for up to 6 inputs .

    Cheers Andy
    At the cutting edge of Numptyness!

  2. #2
    Join Date: Jan 2014

    Location: london se6

    Posts: 823
    I'm AndyElectroNumpty.

    Default

    DCB1 boards

    Sent from my SM-G950F using Tapatalk
    At the cutting edge of Numptyness!

  3. #3
    Join Date: Jan 2014

    Location: london se6

    Posts: 823
    I'm AndyElectroNumpty.

    Default

    Input selector

    Sent from my SM-G950F using Tapatalk
    At the cutting edge of Numptyness!

  4. #4
    Join Date: Jan 2014

    Location: london se6

    Posts: 823
    I'm AndyElectroNumpty.

    Default

    All in !

    Sent from my SM-G950F using Tapatalk
    At the cutting edge of Numptyness!

  5. #5
    Join Date: Jan 2014

    Location: london se6

    Posts: 823
    I'm AndyElectroNumpty.

    Default

    le Burmp
    At the cutting edge of Numptyness!

  6. #6
    Join Date: Jun 2010

    Location: Adelaide, South Australia

    Posts: 520
    I'm Steve.

    Default

    Would you be willing to send the selector to South Australia?
    I have a Ten Years After Mesmerize B1 pre, it sounds very good if anyone is on the fence for the pre boards, just buy one., you wont regret it.
    Steve.

    Kit I have:
    CD player, TTs, Phono stages, Pre amps, Power amps, Integrated amps, DACs, Streamers, Speakers and a bunch of cables.

  7. #7
    Join Date: Jan 2014

    Location: london se6

    Posts: 823
    I'm AndyElectroNumpty.

    Default

    Quote Originally Posted by Batty View Post
    Would you be willing to send the selector to South Australia?
    I have a Ten Years After Mesmerize B1 pre, it sounds very good if anyone is on the fence for the pre boards, just buy one., you wont regret it.
    Hi thanks , yes no probs sending to Oz but I'll check postage and get back to you if thats ok? Shouldn't be stupid money though.

    Sent from my SM-G950F using Tapatalk
    At the cutting edge of Numptyness!

  8. #8
    Join Date: Jan 2014

    Location: london se6

    Posts: 823
    I'm AndyElectroNumpty.

    Default

    Quote Originally Posted by Batty View Post
    Would you be willing to send the selector to South Australia?
    I have a Ten Years After Mesmerize B1 pre, it sounds very good if anyone is on the fence for the pre boards, just buy one., you wont regret it.
    pm sent
    At the cutting edge of Numptyness!

  9. #9
    Join Date: Jun 2010

    Location: Adelaide, South Australia

    Posts: 520
    I'm Steve.

    Default

    replied
    Steve.

    Kit I have:
    CD player, TTs, Phono stages, Pre amps, Power amps, Integrated amps, DACs, Streamers, Speakers and a bunch of cables.

  10. #10
    Join Date: Jan 2014

    Location: london se6

    Posts: 823
    I'm AndyElectroNumpty.

    Default

    Salas Mesmorize Type Input Selector - sold and on it's way down under

    2 DCB1 boards still available !
    At the cutting edge of Numptyness!

+ Reply to Thread
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •