The decks get shipped all the time in two large boxes with a few layers of foam. You should be able to source the boxes etc direct from Notts Analogue. The TT will need dismantling and i would ship the delicate arms cart etc separately again
Location: Tring, Hertfordshire, UK
Posts: 31
I'm David.
The decks get shipped all the time in two large boxes with a few layers of foam. You should be able to source the boxes etc direct from Notts Analogue. The TT will need dismantling and i would ship the delicate arms cart etc separately again
Location: Glasgow
Posts: 93
I'm Stuart.
Thanks for the concerns regarding posting but like all NA decks they can be broke down and reassembled very easily
3 separate double boxes should do the trick if it comes to it
Location: KY - Scotland
Posts: 5,470
I'm Mike.
When I got my TT back from Notts analogue, they packed it in a very thick large cardboard box with the tonearm in the same box but obviously wrapped separately, I don't think NA decks are fragile at all, not being suspended. I think they charged me £25 for the box, which was made of cardboard so thick it was very rigid.
Current system 1210 GR. CDP - Meridian G08. Amp -Sugden A21I - Sig. Wharfedale Lintons.
[QUOTE=Slammed56;1128224]
I’ve got the Dais up and running next to the Hyperspace and imho it’s better but nowhere near as big a jump in performance as I got when I went from my old Spacedeck to the Hyper
Any little improvement at that level is worth it regardless. Enormous jumps in performance rarely occur (e.g. Naim upgrading ladder). I love my Dais, but dread having to haul the platter off for a check-up now and again. A 25 kg bag of sand or cement is easier !
What arm-boards came with the Dais, or are you retaining any on the Hyper?
Location: Glasgow
Posts: 93
I'm Stuart.
[QUOTE=Mike Reed;1129073] Too true Mike, at least the Dais gets the screw in finger lifters to assist, the Hyper has nothing and it’s still a fair weight to lift carefully off
Its great having the 2 NA decks side by side in my own room , who wouldn’t 😀
Armboards on the Dais are for 12’ PU7 , which I think maybe also Rega fit , and a 9” NA one at the back
On my Hyper it’s the 12” Jelco and 9” NA I’ve also got one of the little collets that reduce the size to rega fit , these are cheap to buy from Nottingham Analogue so loads of options for the new owner to consider
Location: Glasgow
Posts: 93
I'm Stuart.
Saturday Night Bump
Location: Glasgow
Posts: 93
I'm Stuart.
I’ll consider splitting this, but the turntable will need to sell first
Hyperspace £1750
Wave mechanic PSU £350
Jelco SA-750LB , ammonite collar, cable £400
Ortofon Jubilee £400
Location: Glasgow
Posts: 93
I'm Stuart.
Friday night bump
Thought my prices were pretty fair on this lot
Can anyone let me know if I’m way off the mark please
Location: Glasgow
Posts: 93
I'm Stuart.
Hyperspace Deck reduced to £1500