+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: FS Living Voice OBX R2

  1. #1
    Join Date: Dec 2012

    Location: Stoke on trent

    Posts: 959
    I'm Steve.

    Default FS Living Voice OBX R2

    Living voice OBX R2 in satin walnut.

    I'm listing these on behalf of a chap I bought an amp off last year and have kept in contact with. He doesnt use any forums so is always going to struggle to sell these outside of Ebay. He keeps his kit in a dedicated listening room and it all looks immaculate. I'd love a forum member to get them. THE nicest pair of LVs I've seen with kondo SPC cabling between cabs and crossover. Boxed, one owner. If I was more flush at the moment, these would be mine.
    £1750 inc cables. If you're interested, drop me a pm and I can pass your details








  2. #2
    Join Date: Jan 2018

    Location: blackpool

    Posts: 491
    I'm neil.

    Default

    A question regarding these speakers
    I have been interested in LVs for some time - I have never heard them,I am interested to know do you need jumpers for the crossovers ?
    I know you should always try new stuff in your listening room - but there again sometimes in life you need to take a chance !
    Thanks

  3. #3
    Join Date: Sep 2009

    Location: west mids, UK

    Posts: 3,268
    I'm Phil.

    Default

    Yes , i agree , take the chance and buy them . they are a beautiful speaker and at a show a while back i heard them with a low powered valve amp and prefered it to the watt puppies in the same room .

    https://livingvoice.eu/en/page/products
    ou might slip, you might slide, you might
    Stumble and fall by the road side
    But don't you ever let nobody drag your spirit down
    Remember you're walking up to heaven

    Don't let nobody turn you around
    … Walk with the rich, walk with the poor
    Learn from everyone, that's what life is for
    And don't you let nobody drag your spirit down

    Eric Bibb

  4. #4
    Join Date: Oct 2014

    Location: Surrey

    Posts: 549
    I'm Graham.

    Default

    If you are single wiring from amp, yes you should have jumpers on the crossover inputs. The crossover outputs must have separate cables for each driver.
    If you are biwiring from amp or biamping, then you don't need jumpers on the crossover inputs.
    ATB
    Graham

  5. #5
    Join Date: Apr 2010

    Location: Bristol, since 1978. Current house since 1996!

    Posts: 909
    I'm Chris.

    Default

    Some folk pay lots just for Kondo wire!
    Chris.

  6. #6
    Join Date: Dec 2012

    Location: Stoke on trent

    Posts: 959
    I'm Steve.

    Default

    I ended up buying these myself! they're just too pretty.

    Sold the kondo though.

  7. #7
    Join Date: Dec 2012

    Location: Stoke on trent

    Posts: 959
    I'm Steve.

    Default

    Available without the kondo, but with the rare hitachi SSX cable instead for £1450.*

  8. #8
    Join Date: Oct 2019

    Location: Swansea, Wales, UK

    Posts: 5
    I'm Franco.

    Default

    Hi, I'm Franco a new member and would be VERY interested in buying these LV's OBX R2 I live in Swansea, where are you based?

  9. #9
    Join Date: Dec 2012

    Location: Stoke on trent

    Posts: 959
    I'm Steve.

    Default

    Hi franco, I'm in stoke on trent, Staffordshire.

  10. #10
    Join Date: Oct 2019

    Location: Swansea, Wales, UK

    Posts: 5
    I'm Franco.

    Default

    Thanks Steve, over 3 h from Swansea by car.I have a friend who's happy to drive me there to pick them up. Not sure how it works on this forum but would be good if we could talk by phone can I give you my number here? Or email me at
    Thanks
    Last edited by Spectral Morn; 21-10-2019 at 10:39. Reason: Email removed

+ Reply to Thread
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •