For sale: Mark Levinson Integrated Amplifier HiFi Stereo

[audiop]

Didn't know it had a dac. Do you know the spec, max sampling rate, DSD compatible etc?

Output Power: 200W RMS per channel @ 8 Ω, 20Hz – 20kHz
Damping Factor: >400 @ 20Hz, referred to 8 Ω
Frequency Response:
20Hz – 20kHz, ±0.13dB
2Hz – 250kHz, +0.2dB/–3dB
Signal-to-Noise Ratio:
>98dB (20Hz – 20kHz, unweighted)
>103dB (20Hz – 20kHz, A-wtd), referred to full output – maximum volume setting
Voltage Gain: 40.7dB (maximum volume setting)
Total Harmonic Distortion:
<0.01% @ 1kHz, 200W, 8 Ω
<0.1% @ 20kHz, 200W, 8 Ω
Input Impedance: >45k Ω (RCA & XLR)
Input Overload: 5.5V RMS (RCA & XLR)
Sample Rates/Bit Depth:
PCM: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit
DSD: Native, single- and double-speed
Analog Audio Connectors:
3 pairs single-ended inputs (RCA)
1 pair balanced inputs (XLR)
1 pair single-ended line outputs (RCA)
1 pair loudspeaker outputs ("Hurricane" binding posts w/banana sockets that accept spade lugs with 1/4" (6.3mm) spacing up to 1/8" (3mm) thick)
Digital Audio Connectors:
1 balanced AES/EBU input (XLR)
2 coaxial S/PDIF inputs (RCA)
2 optical inputs (Tos-Link)
1 asynchronous USB input (USB-B)
Control Connectors:
1 RS-232 port (RJ-12 connector)
1 IR input (1/8" phone jack)
1 programmable 12V DC trigger output (1/8" phone jack), 100mA maximum
1 programmable 12 DC trigger input (1/8" phone jack)
1 Ethernet port (RJ-45 connector)
Mains Voltage: 100V AC, 115V AC, or 230V AC (factory-set)
Power Consumption: Maximum 1000W (power on)
Dimensions (HWD): 7.59" x 17.25" x 19.95"
Weight: 72 lbs.

[Light Dependant Resistor]

I wonder if the input voltage can be adjusted internally or by ML?

@Lawrence. max. 192/32 and DSD256.

Good question Edward, As with any Mains related adjustment ALWAYS have power off AND the IEC cord disconnected
the manual for the 585 refers to contacting Mark Levinson in the first instance. https://www.marklevinson.com/contact.html

It looks like the IEC fitting right side cover plate is removed to reveal a switch
to switch to 230v ( Yes UK Voltage is higher at 240V, - but ask ML for guidance, IMO 230-240v rating difference is not that fussy one way or the other )
the label then enabling or revealing the higher voltage as I gather once the switch is changed.
The fuse requirements are though different for each voltage and its a bit vague as to whether moving the cover
changes this or if this needs to be done manually, so contact to Mark Levinson is the first step.

[ovlov854]

If it was a 240v version I'd snap it up Redmon..

I love my 383 and I'm sure the 585 would just be more so...

That's a bargain price for a 585

Hate to be the damp squib but don't forget E.U. buyers and that still us will have to fork out VAT and import tax on top