+ Reply to Thread
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 45

Thread: These are a NO BRAINER IMO!

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date: Nov 2011

    Location: Seaton, Devon, UK

    Posts: 13,267
    I'm Adrian.

    Default These are a NO BRAINER IMO!

    So a few weeks ago a fellow AoS'er contacted me about SUT's and he told me that he had replaced his interconnects with Belden 8402 w/ Switchcraft 3502A Audiophile High-End RCA ones. He said I should give them a try as they very very good in his opinion.

    A pair arrived yesterday and this morning I decided to try them out the results are below, I will let you make you own judgements.

    You can source the ones I purchased at https://www.ebay.co.uk/itm/Belden-84...72.m2749.l2649 if you want to give them a try.





    Listening is the act of aural discrimination and dissemination of sound, and accepting you get it wrong sometimes.

    Analog Inputs: Pro-Ject Signature 10 TT & arm, Benz Micro LP-S, Michel Cusis MC, Goldring 2500 and Ortofon Rondo Blue cartridges, Hitachi FT5500 mk2 Tuner

    Digital:- Marantz SA-KI Pearl CD player, RaspberryPi/HifiBerry Digi+ Pro, Buffalo NAS Drive

    Amplification:- AudioValve Sunilda phono stage, Krell KSP-7B pre-amp, Krell KSA-80 power amp

    Output: Wilson Benesch Vector speakers, KLH Ultimate One Headphones

    Cables: Tellurium Q Ultra Black II RCA & Chord Epic 2 RCA, various speaker leads, & links


    I think I am nearing audio nirvana, but don’t tell anyone.

  2. #2
    Join Date: Nov 2010

    Location: Yorkshire

    Posts: 9,325
    I'm Andrew.

    Default

    So your starting out on the "real" sound journey. welcome!
    SS
    CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10

    VALVE
    PRE
    Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker



  3. #3
    Join Date: Nov 2011

    Location: Seaton, Devon, UK

    Posts: 13,267
    I'm Adrian.

    Default

    Quote Originally Posted by REXTON View Post
    So your starting out on the "real" sound journey. welcome!
    I have been pursuing "Real Sound" as you put it on and off for the past 40 years, and have taken a variety of paths some right some wrong and a few dead ends, but I think I am getting nearer to a system that satisfies my ears anyway.
    Listening is the act of aural discrimination and dissemination of sound, and accepting you get it wrong sometimes.

    Analog Inputs: Pro-Ject Signature 10 TT & arm, Benz Micro LP-S, Michel Cusis MC, Goldring 2500 and Ortofon Rondo Blue cartridges, Hitachi FT5500 mk2 Tuner

    Digital:- Marantz SA-KI Pearl CD player, RaspberryPi/HifiBerry Digi+ Pro, Buffalo NAS Drive

    Amplification:- AudioValve Sunilda phono stage, Krell KSP-7B pre-amp, Krell KSA-80 power amp

    Output: Wilson Benesch Vector speakers, KLH Ultimate One Headphones

    Cables: Tellurium Q Ultra Black II RCA & Chord Epic 2 RCA, various speaker leads, & links


    I think I am nearing audio nirvana, but don’t tell anyone.

  4. #4
    Join Date: Nov 2010

    Location: Yorkshire

    Posts: 9,325
    I'm Andrew.

    Default

    Have you seen Jeff Day's work? I have a 3rd system with a full loom of Duelund and Belden cabling. I have Belden IC's bewteen my Radford pre and power amps, and into the phonostage. I have Duelund speaker cable and I have rewired my Celestion Ditton 15 speakers with Duelund cabling. It does sound good!
    SS
    CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10

    VALVE
    PRE
    Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker



  5. #5
    Join Date: Nov 2011

    Location: Seaton, Devon, UK

    Posts: 13,267
    I'm Adrian.

    Default

    Quote Originally Posted by REXTON View Post
    Have you seen Jeff Day's work? I have a 3rd system with a full loom of Duelund and Belden cabling. I have Belden IC's bewteen my Radford pre and power amps, and into the phonostage. I have Duelund speaker cable and I have rewired my Celestion Ditton 15 speakers with Duelund cabling. It does sound good!
    I am not aware of Jeff Day, probably my loss? I find it very interesting that the Dueland and Belden cables produce great results and are such VFM. I have always been quite sceptical about very high priced cables and the justification of their prices. That is not to say that they may not be good or producing great results but I always thought that there could very good cables out there that were sensibly priced and gave great results.
    Listening is the act of aural discrimination and dissemination of sound, and accepting you get it wrong sometimes.

    Analog Inputs: Pro-Ject Signature 10 TT & arm, Benz Micro LP-S, Michel Cusis MC, Goldring 2500 and Ortofon Rondo Blue cartridges, Hitachi FT5500 mk2 Tuner

    Digital:- Marantz SA-KI Pearl CD player, RaspberryPi/HifiBerry Digi+ Pro, Buffalo NAS Drive

    Amplification:- AudioValve Sunilda phono stage, Krell KSP-7B pre-amp, Krell KSA-80 power amp

    Output: Wilson Benesch Vector speakers, KLH Ultimate One Headphones

    Cables: Tellurium Q Ultra Black II RCA & Chord Epic 2 RCA, various speaker leads, & links


    I think I am nearing audio nirvana, but don’t tell anyone.

  6. #6
    Join Date: Nov 2010

    Location: Yorkshire

    Posts: 9,325
    I'm Andrew.

    Default

    Jeff loves his Belden IC's and Duelund cabling. He's produced many articles. Here's a link, fill your boots https://jeffsplace.positive-feedback...o-jeffs-place/
    SS
    CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10

    VALVE
    PRE
    Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker



  7. #7
    Join Date: Sep 2014

    Location: brighton uk.

    Posts: 4,737
    I'm jamie.

    Default

    im in!
    My System
    John Wood KT88 Amp.
    Paradise Phono Stage
    Sony TTS-8000 Turntable.
    PMAT-1010 MK6 Tonearm.
    Ortofon Cadenza Bronze
    Sony X555ES Cd Player
    Yamaha NS1000m Speakers

  8. #8
    Join Date: Sep 2014

    Location: brighton uk.

    Posts: 4,737
    I'm jamie.

    Default

    although i'll wait till you score my interconnect first
    My System
    John Wood KT88 Amp.
    Paradise Phono Stage
    Sony TTS-8000 Turntable.
    PMAT-1010 MK6 Tonearm.
    Ortofon Cadenza Bronze
    Sony X555ES Cd Player
    Yamaha NS1000m Speakers

  9. #9
    Join Date: Nov 2011

    Location: Seaton, Devon, UK

    Posts: 13,267
    I'm Adrian.

    Default

    Quote Originally Posted by karma67 View Post
    although i'll wait till you score my interconnect first
    Sorry I am back at work this week and will not get to the KARMA interconnects till Friday, weekend is wiped out due to a wedding to attend. If I need to I will do some more listening on Monday.
    Listening is the act of aural discrimination and dissemination of sound, and accepting you get it wrong sometimes.

    Analog Inputs: Pro-Ject Signature 10 TT & arm, Benz Micro LP-S, Michel Cusis MC, Goldring 2500 and Ortofon Rondo Blue cartridges, Hitachi FT5500 mk2 Tuner

    Digital:- Marantz SA-KI Pearl CD player, RaspberryPi/HifiBerry Digi+ Pro, Buffalo NAS Drive

    Amplification:- AudioValve Sunilda phono stage, Krell KSP-7B pre-amp, Krell KSA-80 power amp

    Output: Wilson Benesch Vector speakers, KLH Ultimate One Headphones

    Cables: Tellurium Q Ultra Black II RCA & Chord Epic 2 RCA, various speaker leads, & links


    I think I am nearing audio nirvana, but don’t tell anyone.

  10. #10
    Join Date: Nov 2011

    Location: Seaton, Devon, UK

    Posts: 13,267
    I'm Adrian.

    Default

    The fellow AoS'er who recommended them is very kindly sending me his Hagerman Frybaby on loan to burn them in, he said that it improves them even further. So if they get better it will be interesting in what way. Not something I done before with any cable so I will be interested in the result. I will of course repeat the listening tests and report back again. TTFN
    Listening is the act of aural discrimination and dissemination of sound, and accepting you get it wrong sometimes.

    Analog Inputs: Pro-Ject Signature 10 TT & arm, Benz Micro LP-S, Michel Cusis MC, Goldring 2500 and Ortofon Rondo Blue cartridges, Hitachi FT5500 mk2 Tuner

    Digital:- Marantz SA-KI Pearl CD player, RaspberryPi/HifiBerry Digi+ Pro, Buffalo NAS Drive

    Amplification:- AudioValve Sunilda phono stage, Krell KSP-7B pre-amp, Krell KSA-80 power amp

    Output: Wilson Benesch Vector speakers, KLH Ultimate One Headphones

    Cables: Tellurium Q Ultra Black II RCA & Chord Epic 2 RCA, various speaker leads, & links


    I think I am nearing audio nirvana, but don’t tell anyone.

+ Reply to Thread
Page 1 of 5 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •