Current: [P20] Roon/Tidal > Custom PC> Chevron Paradox NDF16 > Phast Pre > Neuro. 686 > Tannoy Berkley (RFC tweaks)
Any joy Edward?
Well yes - kind of. Been in contact with Paul C. I'll be sending the crossovers to him which he will sort out and upgrade (new caps, copper on pcb tracks etc). He will also measure/calibrate things such that responses will be within 1%.
Given that the original crossovers are as rare as angel's poo this seems the best course of action.
Now onto the cabs .... Waiting for dry weather so I can sand the beasts in the garden.
atb
Edward
Current: [P20] Roon/Tidal > Custom PC> Chevron Paradox NDF16 > Phast Pre > Neuro. 686 > Tannoy Berkley (RFC tweaks)
Good for you!
John
In a previous post I gave you the dimensions of the bass tube and also Lawrence questioned the width of the baffle board. I'm stripping things down so had another look.
The diameter is still 7cm but the length of the bass tube is more like 12 cm. This from the edge of the baffle board to the bottom of the tube. I think I mentioned 11.
The baffle board where the tube is measures 2cm in thickness, and as the glue line where the tube meets the baffle board is about 0. 75cm I guess there is some form of routing lip to hold the tube. However I can't see or feel such a lip.
The width of the baffle board where the driver sits is 4cm, the extra width being an extra layer from the top of the cabinet to about 2/3 down the cabinet.
Here is a picture of the glue line I mentioned.
§
Current: [P20] Roon/Tidal > Custom PC> Chevron Paradox NDF16 > Phast Pre > Neuro. 686 > Tannoy Berkley (RFC tweaks)
Thanks Edward
While stripping down I found these badges. Magic!
I had wondered where they had gone. Now the drivers look complete.
§
Current: [P20] Roon/Tidal > Custom PC> Chevron Paradox NDF16 > Phast Pre > Neuro. 686 > Tannoy Berkley (RFC tweaks)
Nice!
Last edited by Edward; 12-06-2019 at 20:34.
Current: [P20] Roon/Tidal > Custom PC> Chevron Paradox NDF16 > Phast Pre > Neuro. 686 > Tannoy Berkley (RFC tweaks)