This ad needs a PRICE, ASAP. Also, the OP has three days to respond to my earlier post about his ridiculous unjustified rant, or his account will be suspended. Ignoring the situation isn't an option.
Marco.
This ad needs a PRICE, ASAP. Also, the OP has three days to respond to my earlier post about his ridiculous unjustified rant, or his account will be suspended. Ignoring the situation isn't an option.
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
Clock is ticking, Simon.... I can see from the stats that you've logged onto the forum both yesterday, after I posted the message, and also today, so must've read it.
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
I can't understand why this amount of effort has been used on this ad, just pull the bloody thing
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Well as there's no price I assume it's free, in which case I'll have it!
At the cutting edge of Numptyness!
How many chances is he going to get. Pull it and ban him for non compliance. He is obviously not going to go to any effort on both the price or pictures.
'ANDSOME IN THE SUMMER..'ORIBBLE IN THE WINTER. Barney Milne
Cambridge Audio CXN, Seagate nas drive, Michell Gyrodec SE, SME309, Benz M2 Ruby cantilever, Denon DL103, Primare R32, Densen D20, Densen D30, Cambridge Audio 840A V2 integrated, Pioneer SX-N30AE Network Stereo Receiver, Roksan Darius speakers, Technics speakers, Canon speakers, Bastanis Dragonfly Horns, REL Storm III sub, Target R1 speaker stands, Atacama Equinox.
Location: Solihull
Posts: 716
I'm Martin.
Lumley Heliosphere Audiomods 5
Voyd Valdi AN Arm 1 V2 and Denon MC
Audiomeca Talisman Highly Modded
Audiomeca Kreatura &,SW1X DAC1
Hovland HP200 MC
Hovland Radia
Ming Da 805 monos
Magnum Dynalab Etude, RWA Cassabria + LCD 3
Wilson Benesch Actors
Cables by Cardas, Hovland G3 and Yter
Location: Seaford UK
Posts: 1,861
I'm Dennis.
Ignoring the etiquette and rule breach, it is obvious that any potential buyer will want to know the condition, which necessitates the best pics possible, and the price being asked - this is a universal requirement.
I two years ago built up a racing bike (vintage equipment from the turn of the century), and bought what must have been several hundred parts from all over the world using Ebay. I had only two problems, both within the UK, one with poor pictures obscuring the condition, and another regarding corroded-solid parts.
The poor picture one I just accepted even though it was not really good enough behaviour on the part of the seller.
The other seller was brilliant and offered a substantial refund to purchase the corroded parts new.
Every other seller, and from all over the world was really brilliant and honest, always acknowledging my requests, providing information and pictures as required, and IMO these experiences are far better than those in general with supposedly bona-fide retailers. I'm baffled at the apparent lack of consideration being shown here.
Good pics speak volumes as far as I'm concerned, even tells me something about the 'attitude' of the seller.
I'm drawn to good pictures of an item for sale, I can see exactly what I'm getting and tells me the seller is bothered, not sloppy and doesn't appear to have anything to hide - all reassuring which is key in this game.
When selling I treat potential buyers the same way I want to be treated with regard to any potential purchase.
If it's all a bit 'meh' in presentation and description, I tend to look elsewhere
My System:
Amplification - Sansui AU-alpha 707 DR
Turntable - Technics SP10 MK2-Technics EPA-250 Tonearm-Yannis Tome 423.5Plus tonearm cable-Eichmann KLEI Absolute Harmony plugs.
Ortofon Cadenza Black moving coil cartridge-Fritz Gyger S re-tip. Panzerholz plinth.
CDP - Pioneer PD-91
Speakers - Spendor D7 on Soundcare SuperSpikes
QED Silver Spiral speaker cable-airloc banana plugs
Mains - Ultra Pure silver plated un-switched socket-Missing link EPS 500 silver plated plugs-Hi-Fi Tuning gold plated silver ceramic 13 amp fuses
This all seems a bit harsh fellas with talk of banning etc.
There are rules for selling which ideally everyone reads before posting If a post is made and it doesn't comply, one of the mods usually points out that there is no photo, price or location etc and if it is not updated it will be removed. Sounds perfectly fair and reasonable to me, why the witch hunt on this occasion?
Chord Mojo / Sennheiser HD600