+ Reply to Thread
Page 65 of 66 FirstFirst ... 155563646566 LastLast
Results 641 to 650 of 651

Thread: Magna Audio's custom-made counterweight balance and armboard service!

  1. #641
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,481
    I'm Steve.

    Default

    Here are a pair of Le Cleach profiled tweeter horns I turned for Simon Mears Audio.
    To fit 1" Altec 802 compression tweeter drivers.

    Turned from Poplar wood, sealed and then lacquered.

    Brass mounting plates are used instead of integral wooden discs as the driver has two threaded mounting bolts, and it's tight with the Le Cleach profile getting the securing nuts on otherwise.

    Fun project.















    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  2. #642
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,481
    I'm Steve.

    Default

    Here's the USA customer deck pic of his Technics SP-10 with slate bed and the sizeable solid ebony armboard I made for him.

    Always nice to see where these creations end up.
    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  3. #643
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,481
    I'm Steve.

    Default

    Customer pictures of the solid Ebony armboard for Technics SL-1210GR record deck fitted with Acoustic Signature TA-500 tonearm. Tight but doable.





    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  4. #644
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,481
    I'm Steve.

    Default

    Here's an ebony armboard and fitting job for a gloss black plinthed SP-10.

    The thin copper mat, and tall Stax arm and base, meant with the existing MDF veneered armboard was not low enough.

    The Stax arm was very interesting. I've not seen one before.
    3 interchangeable arm tubes. 2 S shaped and one straight.

    Nice setup.





    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  5. #645
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,481
    I'm Steve.

    Default

    Here's an Armpod and counterweight job that made it to Oz in record time (thanks Transglobal Express).

    It's an ultra low but larger diameter pod, full of cast lead for high mass.

    2 interchangeable armboards, one for Rega 3 point and one for Linn.

    Finished in satin black lacquer and natural ebony.

    The stainless steel counterweight is an Alphason heavy work nylon damper insert.





    In the making



    Turning the feet discs



    Heavy counterweight



    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  6. #646
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,481
    I'm Steve.

    Default

    This one was bound for Hong Kong

    A super heavyweight record puck in polished ebony and gunmetal.

    Features ebony cores sunk into the gunmetal.





    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  7. #647
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,481
    I'm Steve.

    Default

    Here is the low rider wide armpod mounted up in the customer's system in Australia.

    Rega RB2000 tonearm.



    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  8. #648
    Join Date: Sep 2020

    Location: Milton Keynes

    Posts: 10
    I'm Arvydas.

    Default

    Hi Marco, arm boards for Thorens TD150 mark I and markII?

  9. #649
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,481
    I'm Steve.

    Default

    Quote Originally Posted by VintageStereo View Post
    Hi Marco, arm boards for Thorens TD150 mark I and markII?
    Steve here.
    Yes can be done. Private Message me.



    Sent from my Pixel XL using Tapatalk
    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  10. #650
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,481
    I'm Steve.

    Default

    Here's an armboard replication in aluminium. 10mm thick.
    From finish to start.

    Black lacquer and M3 caphead bolts for SME armbase mounting.





    Etch primer phase. This gives a secure base on the aluminium for the top coats of lacquer.



    The bare aluminium board. All fitting holes and shaping done



    Cut to shape. Alongside the wooden board it will replace



    Will be posted off once the lacquer is fully hardened.
    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

+ Reply to Thread
Page 65 of 66 FirstFirst ... 155563646566 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •