+ Reply to Thread
Page 66 of 67 FirstFirst ... 165664656667 LastLast
Results 651 to 660 of 662

Thread: Magna Audio's custom-made counterweight balance and armboard service!

  1. #651
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,515
    I'm Steve.

    Default

    Progress catch-up on a pair of mid bass horns I'm making.

    They will be used in a 4/5 way full spectrum horn system.

    18mm premium birch plywood.
    1.2m long. Exponential horn flare.
    Frequency usage 100Hz to 400Hz.
    Eminence Kappa 12A 12" bass drivers.

    Driver chamber and bracing to do.

    These will fine articulate, fast and tuneful mid bass.





    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  2. #652
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,515
    I'm Steve.

    Default

    Simon of Simon Mears Audio asked me to make an improved jig to hold spokeshave blades during sharpening.

    9mm brass was chosen.
    Various shapings, drillings and fittings.







    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  3. #653
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,515
    I'm Steve.

    Default

    Progress on the large midbass horn project.

    Now there are two and mouth surround is fabricated.

    They will be used in a 4/5 way full spectrum horn system.

    18mm premium birch plywood.

    1.2m long. Exponential horn flare.

    Frequency usage 100Hz to 400Hz.

    Eminence Kappa 12A 12" bass drivers.

    Driver chamber and bracing to do.

    These will have great articulate, fast and tuneful mid bass.



    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  4. #654
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,515
    I'm Steve.

    Default

    Here's a little one for Simon Nears Audio.
    Lacquered steel brackets for a Tube/Valve amp build.



    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  5. #655
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,515
    I'm Steve.

    Default

    Solid ebony turnable / equipment platforms.
    Circa 18"x16" and 10"x16" both 2" thick.
    Dowelled and wood epoxyed (supplied by Make Wood Good - Oak and Teak slow set epoxy).
    This is what nearly 20kgs of ebony looks like.
    The small one nearly finished, the big one rough sanded. Levelled and bevelled.









    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  6. #656
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,515
    I'm Steve.

    Default

    Here's a pic of the Driver that will go into the Exponential midbass horns.

    I've been making the back boxes, so more pics to follow soon.

    Attached Images Attached Images
    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  7. #657
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,515
    I'm Steve.

    Default

    As part of the ebony equipment bases project, I was also commissioned to make 8 of 3" x 3" x 1" and 8 of 2" x 2" x 1" ebony blocks.
    These will go under various pieces of equipment.

    Here they are rough sawn.



    Here are the 3" blocks accurately sized and coarse finished.



    Next up the 2" square blocks and then fine sanding and polishing.
    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  8. #658
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,515
    I'm Steve.

    Default

    Here are the finished ebony feet / under equipment stands.





    Also a Technics SL-1210 ebony armboard turned to the customers dish dimensions.





    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  9. #659
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,515
    I'm Steve.

    Default

    Fidelity Research FR64s low compliance type cartridge, anti skate weight.

    Off to Ireland.

    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  10. #660
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,515
    I'm Steve.

    Default

    Here's the SL-1210 ebony Armboard made to customer spec to fit his Rega tonearm, all fitted up.
    A great job done fitting it.
    Thanks too for letting me share the images.







    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

+ Reply to Thread
Page 66 of 67 FirstFirst ... 165664656667 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •