+ Reply to Thread
Page 67 of 78 FirstFirst ... 1757656667686977 ... LastLast
Results 661 to 670 of 771

Thread: Magna Audio's custom-made counterweight balance and armboard service!

  1. #661
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,855
    I'm Steve.

    Default

    The mid bass horn speakers all finished. Palleted and ready to ship to Sunderland.

    Rectangular mouths, circa 60cm X 48cm at widest and over 1.2m long.
    Computer modelled in Hornresp first.
    Going to used around 95Hz to 400Hz
    Made from 6mm void free birch plywood sheets, laminated in several layers to be exponentially flared / curved.
    Backboxes from 21mm birch plywood.
    12" Eminence bass driver gives excellent detail / punch in this frequency range and is ideally suited to front horn loading.











    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  2. #662
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,855
    I'm Steve.

    Default

    A new pair of my premium birch plywood cabinets are underway.
    These are computer modelled to have the same back loaded horn characteristics as the regular rectangular GRFs.
    These are taller and deeper to achieve the same volume and horn path, but with a more room friendly footprint.

    100% 21mm premium birch plywood is used throughout. Featuring tear drop baffles and cloth blacked needled wood felt damping.

    The first cabinet is nearing completion. Plinths, drivers etc to go.

    These will have separate birch plywood boxes for the crossovers.

    Always very nice to work with premium birch plywood.









    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  3. #663
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,855
    I'm Steve.

    Default

    Here's an aluminium / ebony motor stand for a turntable in Hong Kong.
    The aluminium alone weighs 7kgs.

    2 heights for flexibility.





    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  4. #664
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,855
    I'm Steve.

    Default

    Next up are two Verdier Platine turntable style solid copper cube bases and ebony top boards.
    The copper cubes had to be cast at a foundry and weight 5-6kgs each.
    The ebony armboards are 2x1" thick and 2x1.25" thick.

    Drilling, machining and finishing of the ebony to go.







    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  5. #665
    Join Date: Sep 2014

    Location: brighton uk.

    Posts: 4,737
    I'm jamie.

    Default

    what it like to turn copper?
    My System
    John Wood KT88 Amp.
    Paradise Phono Stage
    Sony TTS-8000 Turntable.
    PMAT-1010 MK6 Tonearm.
    Ortofon Cadenza Bronze
    Sony X555ES Cd Player
    Yamaha NS1000m Speakers

  6. #666
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,855
    I'm Steve.

    Default

    Quote Originally Posted by karma67 View Post
    what it like to turn copper?
    No problem at moderate speed, sharp carbide cutter and neat cutting oil applied each pass.
    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  7. #667
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,855
    I'm Steve.

    Default

    Here are the copper cube bases and ebony armboards made and finished.
    These fit Verdier Platine.

    One of them was made for the SME range of arms. A SME V will be used in this customers set up.





    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  8. #668
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,855
    I'm Steve.

    Default

    The ebony platforms & supports, copper & ebony armboards and aluminium & ebony motor mount made it to Hong Kong in great time, thanks Transglobal Express.

    All mounted up on the customers amazing turntable.

    Here's some early feedback

    "Hi Steve
    Everything arrived safely. Installed one copper/ebony armboard and some of the ebony footers on JC Verdier. Oh wow - more smoother, luscious music; better extended, deeper bass

    Thanks again
    David"











    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  9. #669
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,855
    I'm Steve.

    Default

    Another La Platine Verdier arm block.
    This time in billet aluminium to match the one I made last year work an SME arm mount.
    For the same customer, one arm is never enough



    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  10. #670
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,855
    I'm Steve.

    Default

    A pair of Le Clčac'h profile tweeter horns.
    They will be used 3500Hz and up with a 1" throat diameter compression driver, in a 4/5 way front loaded horn system.

    The finished lacquered articles





    Under construction, turning on the lathe and in the paint shop.











    Fun project.
    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

+ Reply to Thread
Page 67 of 78 FirstFirst ... 1757656667686977 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •