-
Can't remember now it was about 15 years ago. It takes all the pre-amp gubbins out of circuit.
EDIT: I have tried to find where I wrote down the numbers of the resistors to be removed but without any luck. Amazingly I found where I had stored them by putting them like a staple to the back of an old Russ Andrews catalogue, but the numbers weren't written on there! But they may not have been of any use to you as it seems to depend on the serial number and year of manufacture as which resistors are the relevant one's. I only had to remove 2 resistors, but the manual refers to re-siting them and/or removing or adding jumpers to certain points.
I bought my 8000a in 1995 and the serial no ended with an F
There is a PDF of an Audiolab manual on Hifi Engine. I saved it as a PDF but it will not load here so can't add it as an attachment to this post. It gives details of what to do for some serial numbers, so it may help you if yours is one of those.
Here is the link https://www.hifiengine.com/manual_li...ab/8000a.shtml but you will need to register to view the manual.
Last edited by Puffin; 01-01-2019 at 15:20.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules