+ Reply to Thread
Results 1 to 3 of 3

Thread: Is the platter to armboard height of SL-150 same as SL-1200/1210 ?

  1. #1
    Join Date: Oct 2014

    Location: Surrey

    Posts: 549
    I'm Graham.

    Default Is the platter to armboard height of SL-150 same as SL-1200/1210 ?

    Hi,

    Am looking at getting an armboard made up for my SL 150. To assist Steve, I need to determine the depth of the armboard height.

    I was assuming the height dimensions (i.e. top of platter relative to plinth/armboard cut-out) are same or similar to a 1210. However one thing I have learned is that it is best not to assume anything!!!

    I will of course do some measurements and try to work it out however if anyone has done this before with a SL-150 (or 1300/1400/1500 dimensions) any advice much appreciated.

    Graham

  2. #2
    Join Date: Feb 2017

    Location: SE London

    Posts: 24
    I'm Keith.

    Default

    Sorry I don't know the answer. However why don't you buy a SL-150 armboard; widely available for many arms in materials ranging from stainless steel to exotic timbers. I bought a stainless steel armboard for my Jelco SA750D.

  3. #3
    Join Date: Apr 2011

    Location: Northamptonshire

    Posts: 185
    I'm Angus.

    Default

    I do not know about the SL-150, but the SL-150 Mk2 platter sits significantly higher above the top plate than an SL12x0 Mk2

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •