What feet do you use under your speakers ?

[brian2957]

I've been using a pair of Tannoy 637 floorstanders for the last few years . They're currently on some spikes . The problem is that I have laminate flooring in my listening room and so have to sit them on either pieces of granite or little wooden platforms . I was contemplating fitting rubber feet instead of the spikes and putting them on the floor . Anyone have any experience in changing from spikes to another type of feet for speakers ? If so what are you using ?

[struth]

Using rubber ones now too. Those cheap ones from a diy store. Work ok but Ive got solid floors

[brian2957]

Cheers Grant , I might give those a go soon .

[CageyH]

Soundcare Superspikes are what you need.

[Edward]

Soundcare Superspikes are what you need.

+1

in fact + 100

[Macca]

+1

in fact + 100

At £66 for 4? Not in this lifetime.

[brian2957]

Thanks for all the suggestions . I'll have a look at all of these .

[Beobloke]

I'm using the small rubber feet that came stuck to the bottom of the speakers. Given the speakers weight 132kg each, I'm not in any hurry to experiiment with any others!

[tapid]

Have a look at Something Solid missing link feet as well Brian, sold by those good people at deco audio. They may seem a bit expensive but they really open up the sound and in
my system made quite a difference. Best to look at pics on there website but basically the spike is suspended and not touching ground at all. best wishes B

[RobbieGong]

+1

in fact + 100

+101 no brainer they are excellent and dont cost daft money. Wouldnt be without them.